Sample Record for 2026-09-14-4
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 994523 DEA: 041K3004 EFIS: 0416000226 COOP: 042856
QA Service Level: 2
DIST-CO-RTE-PM: 04-SCL-280-7.1/9.5
Work Description: Improve Traffic Operations, Wolfe Road
Location Description: SCL 280/Wolfe Rd. Interchange
Contractor Name: BRIDGEWAY CIVIL CONSTRUCTORS, INC.
Contractor Address: 3333 Vaca Valley Parkway, Suite 2000, Vacaville, CA 95688
Resident Engineer: Kumar Lakshmanan Structure Rep.: Hoc Doan
Sample Information
DIME Sample ID: 2026-09-14-4
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: (209) 249-4700
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 09/14/2026
Date that the sample was received by the laboratory/organization performing the testing: 09/14/2026
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC
Material Information
Source Identification (SMARA, name of Pit or Job Site): Con-Fab California, LLC
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Test
DIME Test ID: 2026-09-14-4-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 09/23/2026
Date Tested: 09/14/2026
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: jerryx@confabca.com
Organization Phone: (408) 466-5557
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
96.4 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
80.9 %
|
|
Cumulative percent passing the #4 sieve
|
52.7 %
|
|
Cumulative percent passing the #8 sieve
|
40 %
|
|
Cumulative percent passing the #16 sieve
|
24.4 %
|
|
Cumulative percent passing the #30 sieve
|
14.2 %
|
|
Cumulative percent passing the #50 sieve
|
7.3 %
|
|
Cumulative percent passing the #100 sieve
|
3.3 %
|
|
Cumulative percent passing the #200 sieve
|
1.5 %
|
Test
DIME Test ID: 2026-09-14-4-2
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 09/23/2026
Date Tested: 09/14/2026
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: jerryx@confabca.com
Organization Phone: (408) 466-5557
General Comments for this Test: 81%, 88%, 89%
Test Result Compliance:
Additional Comments When Verified:
Test
DIME Test ID: 2026-09-14-4-3
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 09/23/2026
Date Tested: 09/14/2026
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: jerryx@confabca.com
Organization Phone: (408) 466-5557
General Comments for this Test: 1/2": 1.03%
3/8": 0.65%
Sand: 1.36%
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.4 %
|
Test
DIME Test ID: 2026-09-14-4-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 East Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email:
Organization Phone: (209) 249-4700
This test has been superseded on 09/23/2026. The corrected test ID is: 2026-09-14-4-5
Reason: retested
Test
DIME Test ID: 2026-09-14-4-5
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 09/23/2026
Date Tested: 09/17/2026
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: jerryx@confabca.com
Organization Phone: (408) 466-5557
General Comments for this Test: 1/2": 1.92%
3/8": 2.36%
Sand: 4.31%
The test was superseded from test ID: 2026-09-14-4-4
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
4.3 %
|
