Print Report | Back to Sample Detail

Sample Record for 2026-08-20-69

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1002511 DEA: 022K2104 EFIS: 0225000051 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-36,172-unknown
Work Description:
Location Description: FOR CONSTRUCTION ON STATE HIGHWAY IN TEHAMA COUNTY NEAR MINERAL ON ROUTE 36 FROM 1.3 MILES EAST OF NORTH JUNCTION ROUTE 89 TO 0.1 MILE WEST OF MILL CREEK BRIDGE AND ON ROUTE 172 FROM 0.7 MILE WEST OF DOGWOOD WAY TO EAST JUNCTION OF ROUTE 36.
Contractor Name: Dig It Construction
Contractor Address: 803 Lorraine Dr, P.O. Box 494, Chester, CA 96020
Resident Engineer: Damion Farley Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-08-20-69
TL Number from the TL Form: 036647
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Production Start-Up
Type of Material: Aggregate
Sample Taken Date: 08/20/2026
Date that the sample was received by the laboratory/organization performing the testing: 08/21/2026
The quantity of what the sample constitutes: 2 bags of Combined Lime Treated 3/8-inch Aggregate
A brief description of the sample: Production Start-Up Evaluation
From where was the sample collected: Manufacturer
Laboratory sample identification: D80366A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dig It Construction — Sierra Cascade Aggregate and Asphalt Products (Chester, CA)

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-32-0002
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test

DIME Test ID: 2026-08-20-69-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 09/09/2026
Date Tested: 09/01/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 99 %
Cumulative percent passing the 3/8 in. sieve 91 %
Cumulative percent passing the #4 sieve 32 %
Cumulative percent passing the #8 sieve 19 %
Cumulative percent passing the #16 sieve 13 %
Cumulative percent passing the #30 sieve 9 %
Cumulative percent passing the #50 sieve 7 %
Cumulative percent passing the #100 sieve 6 %
Cumulative percent passing the #200 sieve 4.6 %