Print Report | Back to Sample Detail

Sample Record for 2026-08-24-66

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1002228 DEA: 051R7604 EFIS: 0524000115 QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-229-5.5/9.2
Work Description: RHMA-G overlay, asphalt rubber binder chip seal, & shoulder backing
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-08-24-66
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Paso Robles Field Laboratory
Sample Organization Contact: 1 (209) 610-9363
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/24/2026
Date that the sample was received by the laboratory/organization performing the testing: 08/24/2026
The quantity of what the sample constitutes: 377 Tons
A brief description of the sample: 1/2" RHMA-G DL
From where was the sample collected: Manufacturer
Laboratory sample identification: 260824-L1SL3
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction - Templeton Plant

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 3
HMA Mix Number: 15373
Binder content (%): 7.5
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 3

Test Results

Test

DIME Test ID: 2026-08-24-66-1
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 09/08/2026
Date Tested: 08/24/2026
Submitted By Organization: CT D05 - Paso Robles Field Laboratory
Organization Address: CA,
Organization City: ,
Organization State: CA
Organization Zipcode: 93422
Organization Email: isaac.larey.chezem@dot.ca.gov
Organization Phone: (805) 234-6493
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 63

Test

DIME Test ID: 2026-08-24-66-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Submitted By Organization: CT D05 - Paso Robles Field Laboratory
Organization Address: CA,
Organization City: ,
Organization State: CA
Organization Zipcode: 93422
Organization Email: isaac.larey.chezem@dot.ca.gov
Organization Phone: (805) 234-6493
Data has not been verified.

Test

DIME Test ID: 2026-08-24-66-3
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Submitted By Organization: CT D05 - Paso Robles Field Laboratory
Organization Address: CA,
Organization City: ,
Organization State: CA
Organization Zipcode: 93422
Organization Email: isaac.larey.chezem@dot.ca.gov
Organization Phone: (805) 234-6493
Data has not been verified.