Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1002024 DEA: 044AC704 EFIS: 0420000148
QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-101-8/15.3
Work Description: PAVEMENT - Repaving from Nellen to Miller Creek
Location Description:
Contractor Name: Ghilotti Brothers Incorporated
Contractor Address: 525 Jacoby Street, San Rafael, CA 94901
Resident Engineer: Habteselassie Dawit Structure Rep.: Mohammad S. Alam
DIME Sample ID: 2026-08-24-55
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 385-7413
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/24/2026
Date that the sample was received by the laboratory/organization performing the testing: 08/24/2026
The quantity of what the sample constitutes: 750 tons
A brief description of the sample: 1/2 RHMA-O
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra rRichmond
DIME Test ID: 2026-08-24-55-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/02/2026
Date Tested: 08/24/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL1 PSU
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
1539.8 g
|
|
Corrected Asphalt Binder Content
|
5.39 %
|
|
Mass Loss
|
98.6 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.82 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.19 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2026-08-24-55-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/02/2026
Date Tested: 08/24/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL1 #2 PSU
Test Result Compliance:
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
1549.8 g
|
|
Corrected Asphalt Binder Content
|
5.11 %
|
|
Mass Loss
|
94.8 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.82 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.19 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2026-08-24-55-3
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 09/02/2026
Date Tested: 08/24/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL1 #1
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Is an aggregate correction factor used?
|
No
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
95 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
70 %
|
|
Cumulative percent passing the #4 sieve
|
37 %
|
|
Cumulative percent passing the #8 sieve
|
16 %
|
|
Cumulative percent passing the #16 sieve
|
9 %
|
|
Cumulative percent passing the #30 sieve
|
8 %
|
|
Cumulative percent passing the #50 sieve
|
7 %
|
|
Cumulative percent passing the #100 sieve
|
6 %
|
|
Cumulative percent passing the #200 sieve
|
4.1 %
|
DIME Test ID: 2026-08-24-55-4
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 09/02/2026
Date Tested: 08/24/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL1 #2
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Is an aggregate correction factor used?
|
No
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
94 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
72 %
|
|
Cumulative percent passing the #4 sieve
|
35 %
|
|
Cumulative percent passing the #8 sieve
|
15 %
|
|
Cumulative percent passing the #16 sieve
|
9 %
|
|
Cumulative percent passing the #30 sieve
|
7 %
|
|
Cumulative percent passing the #50 sieve
|
6 %
|
|
Cumulative percent passing the #100 sieve
|
5 %
|
|
Cumulative percent passing the #200 sieve
|
3.9 %
|
DIME Test ID: 2026-08-24-55-5
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
Data has not been verified.