Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213022 DEA: 010G3504 EFIS: 0116000173
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-101-68.2/R93.0
Work Description: POLYESTER CONCRETE OVERLAY & METHACRYLATE DECK TREATMENT
Location Description: HUMBOLDT COUNTY AT VARIOUS LOCATIONS
Contractor Name: MYERS AND SONS CONSTRUCTION, LP
Contractor Address: Unknown
Resident Engineer: AMAL RASHID Structure Rep.: Unknown
DIME Sample ID: 2018-05-09-5
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 05/09/2018
Date that the sample was received by the laboratory/organization performing the testing: 05/09/2018
The quantity of what the sample constitutes: 10 Tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik bond and Reichhold
DIME Test ID: 2018-05-09-5-1
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 07/27/2018
Date Tested: 07/27/2018
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Density Units
|
grams/milliliters
|
Liquid Density (grams per milliliter)
|
104
|
DIME Test ID: 2018-05-09-5-2
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 07/27/2018
Date Tested: 07/27/2018
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2018-05-09-5-3
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 07/27/2018
Date Tested: 07/27/2018
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Mean of two volatile content determination
|
0.5
|
DIME Test ID: 2018-05-09-5-4
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 07/27/2018
Date Tested: 07/27/2018
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested
|
4
|
Conditioning procedure
|
18/25/50+5/70
|
Speed of testing
|
0.45 in/min
|
Sample 1 Width
|
0.493 in
|
Sample 1 Ultimate strength
|
2896 psi
|
Sample 1 Thickness
|
0.246 in
|
Sample 1 Area
|
0.1213 in^2
|
Sample 1 Ultimate Strength Actual
|
2896 lbs
|
Sample 1 percent elongation
|
59.3 %
|
Sample 1 Time
|
4.17 MM:SS
|
Sample 2 Width
|
0.492 in
|
Sample 2 Thickness
|
0.244 in
|
Sample 2 Area
|
1200 in^2
|
Sample 2 Ultimate strength
|
3249 psi
|
Sample 2 Ultimate Strength Actual
|
3249 lbs
|
Sample 2 percent elongation
|
66.4 %
|
Sample 2 Time
|
5.09 MM:SS
|
Sample 3 Width
|
0.492 in
|
Sample 3 Thickness
|
0.25 in
|
Sample 3 Area
|
0.123 in^2
|
Sample 3 Ultimate strength
|
2952 psi
|
Sample 3 Ultimate Strength Actual
|
2952 lbs
|
Sample 3 percent elongation
|
58.8 %
|
Sample 3 Time
|
4.27 MM:SS
|
Sample 4 Width
|
0.492 in
|
Sample 4 Thickness
|
0.25 in
|
Sample 4 Area
|
0.123 in^2
|
Sample 4 Ultimate strength
|
2716 psi
|
Sample 4 Ultimate Strength Actual
|
2716 lbs
|
Sample 4 percent elongation
|
41.9 %
|
Sample 4 Time
|
2.52 MM:SS
|
Ultimate Strength Average
|
2955 psi
|
Percent Elongation Average
|
56.4 %
|
DIME Test ID: 2018-05-09-5-5
Test Method: CONCLP 1-16: Polyester Resin Patching Materials
Verified Date: 07/27/2018
Date Tested: 07/27/2018
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Type
|
b11
|
Sand Percent
|
67
|
Sand Weight
|
3632
|
Aggregate Type
|
s39
|
Aggregate Percent
|
33
|
Aggregate Weight
|
1816
|
Resin Percent
|
12
|
Resin Weight
|
654
|
MEKP Percent
|
2
|
MEKP Weight
|
13.1
|
Time Started
|
0800
|
Test 1 total load
|
991
|
Test 2 total load
|
1123
|
Test 3 total load
|
1154
|
Test 1 psi
|
496
|
Test 2 psi
|
562
|
Test 3 psi
|
577
|
Average psi
|
545
|