Print Report | Back to Sample Detail

Sample Record for 2026-08-17-36

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000232 DEA: 09392304 QA Service Level: 1
DIST-CO-RTE-PM: 09-MNO-120,182-Var
Work Description: RECYCLE PAVEMENT, PLACE HMA, AND INSTALL GUARDRAIL.
Location Description: MONO COUNTY AT VARIOUS LOCATIONS
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-08-17-36
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/17/2026
Date that the sample was received by the laboratory/organization performing the testing: 08/17/2026
The quantity of what the sample constitutes: 1751 tons
A brief description of the sample: 1/2" HMA Cores PSU
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction Lee Vining Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test

DIME Test ID: 2026-08-17-36-1
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/18/2026
Date Tested: 08/18/2026
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: PSU Cores Density: PSUA=93.9%, PSUB=93.4%, PSUC=94.3%
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 6.1 %
Percent Air Voids 2 6.6 %
Percent Air Voids 3 5.7 %
Average Percent Air Voids 6.1 %
Average Core Density 93.9 %