Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000970 DEA: 031J6304 EFIS: 0321000023
QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-99-6.04/7.06
Work Description: WILLOW SLOUGH REPLACEMENT
Location Description: SACRAMENTO COUNTY NEAR ELK GROVE FROM 0.2 MILE NORTH OF ARNO ROAD TO 0.4 MILE SOUTH OF DILLARD ROAD
Contractor Name: GRANITE CONSTRUCTION
Contractor Address: 4001 BRADSHAW ROAD, SACRAMENTO, CA 95827
Resident Engineer: Chris McDermott Structure Rep.: Nhut (Jim) Ngo
DIME Sample ID: 2026-06-18-90
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Shafter
Sample Organization Contact: (661) 630-7162
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 06/18/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/18/2026
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC - Shafter
Source Identification (SMARA, name of Pit or Job Site): Con-Fab California, LLC - Shafter
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2026-06-18-90-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 08/13/2026
Date Tested: 06/18/2026
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
93.2 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
73.3 %
|
|
Cumulative percent passing the #4 sieve
|
51.5 %
|
|
Cumulative percent passing the #8 sieve
|
40.8 %
|
|
Cumulative percent passing the #16 sieve
|
32 %
|
|
Cumulative percent passing the #30 sieve
|
19.4 %
|
|
Cumulative percent passing the #50 sieve
|
8.8 %
|
|
Cumulative percent passing the #100 sieve
|
2.4 %
|
|
Cumulative percent passing the #200 sieve
|
0.7 %
|
DIME Test ID: 2026-06-18-90-2
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 08/13/2026
Date Tested: 06/18/2026
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2026-06-18-90-3
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 08/13/2026
Date Tested: 06/18/2026
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test: Sand 1.4%, 3/8" rock 1.2%, 1/2" rock 1.2%
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.4 %
|
DIME Test ID: 2026-06-18-90-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 08/13/2026
Date Tested: 06/18/2026
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test: Sand 5.6%, 3/8" rock 1.5%, 1/2" rock 0.6%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
5.6 %
|
