Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001612 DEA: 051P2104 EFIS: 0521000188
QA Service Level: 1
DIST-CO-RTE-PM: 05-MON,-1-44.3
Work Description: CONSTRUCT SOLDIER PILE WALL AND STRUCTURAL CONCRETE BARRIER SLAB.
Location Description: MONTEREY COUNTY NEAR BIG SUR ABOUT 1.1 MILES SOUTH OF PFEIFFER CANYON BRIDGE
Contractor Name: Graniterock Company
Contractor Address: 350 Technology Drive, Watsonville, CA 95076
Resident Engineer: Tommy Munro Structure Rep.: Carson Sperber
DIME Sample ID: 2026-07-28-82
TL Number from the TL Form:
Sample Submitted By Organization: Pacific Crest Engineering, Incorporated
Sample Organization Contact: (831) 227-9083
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 07/28/2026
Date that the sample was received by the laboratory/organization performing the testing: 07/29/2026
The quantity of what the sample constitutes: 14 CY
A brief description of the sample: Type II 4x8 concrete cylinders (3)
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Graniterock Sand City Batch
The concrete mix design number: 07S849R2
The truck number from where the sample was collected:
The batch plant ticket number from where the sample was collected: 218727
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Back of truck chute
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
DIME Test ID: 2026-07-28-82-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 08/12/2026
Date Tested: 08/04/2026
Submitted By Organization: Pacific Crest Engineering, Incorporated
Organization Address: 444 Airport Boulevard Suite 106,
Organization City: Watsonville
Organization State: CA
Organization Zipcode: 95076
Organization Email: jalvarez@pacengineering.net
Organization Phone: (831) 227-9083
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
3
|
|
Test performed
|
With no density determined
|
|
Capped in accordance with?
|
ASTM C1231 - Unbonded Elastomeric Pad Cap
|
|
Average diameter of cylinder 1
|
3.99 in
|
|
Average diameter of cylinder 2
|
3.99 in
|
|
Average diameter of cylinder 3
|
3.99 in
|
|
Cross sectional area of cylinder 1
|
12.5 in^2
|
|
Cross sectional area of cylinder 2
|
12.5 in^2
|
|
Cross sectional area of cylinder 3
|
12.5 in^2
|
|
Compressive strength (to nearest 10 psi)
|
5490 psi
|
|
Maximum load on cylinder 1
|
70504 lb
|
|
Maximum load on cylinder 2
|
63826 lb
|
|
Maximum load on cylinder 3
|
71578 lb
|
|
Type of fracture pattern of cylinder 1
|
5
|
|
Type of fracture pattern of cylinder 2
|
5
|
|
Type of fracture pattern of cylinder 3
|
5
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
|
Correction factor for cylinder 1
|
1
|
|
Correction factor for cylinder 2
|
1
|
|
Correction factor for cylinder 3
|
1
|
|
Age of specimen
|
7 days
|
|
Age of specimen in hours
|
no data0 hours
|
