Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000481 DEA: 081C07U4 EFIS: 0824000168
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-27.5/34.3
Work Description: RUBBERIZED HMA, FIBER OPTIC CABLE SYSTEMS, AND COLD PLANE AC PAVEMENT.
Location Description: RIVERSIDE COUNTY AT AND NEAR ROMOLAND AND HOMELAND FROM BONNIE DRIVE TO WINCHESTER ROAD
Contractor Name: GRIFFITH COMPANY
Contractor Address: 12200 Bloomfield Avenue, Santa Fe Springs, CA 90670
Resident Engineer: Omar Sanchez Structure Rep.: Unknown
DIME Sample ID: 2026-07-08-102
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9098293350
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/08/2026
Date that the sample was received by the laboratory/organization performing the testing: 07/17/2026
The quantity of what the sample constitutes: 1 box, 6 cores
A brief description of the sample: RHMA-G SP 3/4"
From where was the sample collected: Job Site
Laboratory sample identification: 9A, 9B, 9C, 10A, 10B, 10C
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta — Lake Elsinore
DIME Test ID: 2026-07-08-102-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/10/2026
Date Tested: 07/09/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: james.holloway@dot.ca.gov
Organization Phone: (951) 232-8846
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water
|
7399.6 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2549.2 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8869.2 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.361
|
|
Theoretical maximum density at 25°C (77°F)
|
147 lb/ft^3
|
DIME Test ID: 2026-07-08-102-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/10/2026
Date Tested: 07/22/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: james.holloway@dot.ca.gov
Organization Phone: (951) 232-8846
General Comments for this Test: 9A, 9B, 9C
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.197
|
|
Bulk Specific Gravity 2
|
2.148
|
|
Bulk Specific Gravity 3
|
2.166
|
|
Average Bulk Specific Gravity
|
2.17
|
DIME Test ID: 2026-07-08-102-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/10/2026
Date Tested: 07/22/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: james.holloway@dot.ca.gov
Organization Phone: (951) 232-8846
General Comments for this Test: 10A, 10B, 10C
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.206
|
|
Bulk Specific Gravity 2
|
2.172
|
|
Bulk Specific Gravity 3
|
2.19
|
|
Average Bulk Specific Gravity
|
2.189
|
