Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993333 DEA: 04264724 EFIS: 0419000068
QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-101-R20.8/27.1
Work Description: CIP BRIDGES, CONSTRUCT ROADWAY, RETAINING WALLS AND MODIFY ELECTRICAL.
Location Description: MARIN COUNTY IN AND NEAR NOVATO FROM 0.1 MILE SOUTH OF FRANKLIN AVENUE OVERHEAD TO 0.5 MILE SOUTH OF SAN ANTONIO CREEK BRIDGE
Contractor Name: GHILOTTI CONSTRUCTION CO. INC. (RILEY GENAZZI & JOSH SERAFINO)
Contractor Address: 246 GHILOTTI AVE., SANTA ROSA, CA 95407
Resident Engineer: Fabio La Serna Structure Rep.: Jeremy Light
DIME Sample ID: 2026-07-25-12
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 385-7413
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/25/2026
Date that the sample was received by the laboratory/organization performing the testing: 07/25/2026
The quantity of what the sample constitutes: HMA
A brief description of the sample: 3/4 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: BoDean
DIME Test ID: 2026-07-25-12-1
Test Method: AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL1
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of Samples
|
2
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Specific Gravity for Sample 1
|
2.646
|
|
Specific Gravity for Sample 2
|
2.65
|
|
Average Specific Gravity
|
2.648
|
|
Theoretical maximum density at 25°C (77°F)
|
2640.6 lb/ft^3
|
DIME Test ID: 2026-07-25-12-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL1 #1
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
2053.2 g
|
|
Corrected Asphalt Binder Content
|
4.69 %
|
|
Mass Loss
|
112.8 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.36 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.15 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2026-07-25-12-3
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL1 #2
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Corrected Asphalt Binder Content
|
4.43 %
|
|
Mass of HMA Sample prior to ignition
|
2032.7 g
|
|
Mass Loss
|
106.4 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.36 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.15 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2026-07-25-12-4
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L-SL1
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.705
|
|
Bulk Specific Gravity 2
|
2.62
|
|
Average Bulk Specific Gravity
|
2.662
|
DIME Test ID: 2026-07-25-12-5
Test Method: AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL2
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of Samples
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Specific Gravity for Sample 1
|
2.66
|
|
Theoretical maximum density at 25°C (77°F)
|
2652.4 lb/ft^3
|
DIME Test ID: 2026-07-25-12-6
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL2
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.5
|
|
Bulk Specific Gravity 2
|
2.489
|
|
Bulk Specific Gravity 3
|
2.467
|
|
Average Bulk Specific Gravity
|
2.485
|
DIME Test ID: 2026-07-25-12-7
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL2
Test Result Compliance: complies
Additional Comments When Verified:
|
Percent Air Voids
|
94 %
|
|
Percent Air Voids 2
|
93.6 %
|
|
Percent Air Voids 3
|
92.7 %
|
|
Average Percent Air Voids
|
93.4 %
|
|
Average Core Density
|
93.4 %
|
DIME Test ID: 2026-07-25-12-8
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL2
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
2057.6 g
|
|
Corrected Asphalt Binder Content
|
4.61 %
|
|
Mass Loss
|
111.4 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.36 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.15 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2026-07-25-12-9
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL3
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Specific Gravity for Sample 1
|
2.636
|
|
Theoretical maximum density at 25°C (77°F)
|
2628.4 lb/ft^3
|
DIME Test ID: 2026-07-25-12-10
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL3
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.488
|
DIME Test ID: 2026-07-25-12-11
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL3
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2026-07-25-12-12
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/05/2026
Date Tested: 07/25/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: L1-SL3
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
2060.6 g
|
|
Corrected Asphalt Binder Content
|
4.71 %
|
|
Mass Loss
|
113.6 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.65 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.15 %
|
|
Test Temperature
|
538 C
|
