Print Report | Back to Sample Detail

Sample Record for 2026-06-15-86

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000785 DEA: 081J3204 EFIS: 0818000017 COOP: NONE QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-17.8
Work Description: BUILDING WORK, WROUGHT IRON FENCE, HOT MIX ASPHALT, & AGGREGATE BASE.
Location Description: RIVERSIDE COUNTY NEAR LAKE ELSINORE AT LAKE ELSINORE MAINTENANCE STATION AT 18745 CONARD AVENUE
Contractor Name: NATIONWIDE CONTRACTING SERVICES, INC. DBA NATIONWIDE GENERAL CONSTRUCTION SERVICES
Contractor Address: 7660 liberty drive, Huntington beach, CA, 92647
Resident Engineer: Jason Shbaita Structure Rep.: Al Alina AlHakem

Sample Information

DIME Sample ID: 2026-06-15-86
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9098293350
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 06/15/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/15/2026
The quantity of what the sample constitutes: 21.9kg
A brief description of the sample: Class II Base
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CTM 231 TEST LOCATION

Material Information

Source Identification (SMARA, name of Pit or Job Site): Jobsite
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Class II Base Driveway
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test

DIME Test ID: 2026-06-15-86-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 08/18/2026
Date Tested: 06/15/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: james.holloway@dot.ca.gov
Organization Phone: (951) 232-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Standard Count Density 1617 g/cc
Count or Density 1 719 g/cc
Count or Density 2 731 g/cc
Count or Density 3 742 g/cc
Standard Count Moisture 561 g/cc
Moisture Count 1 64 g/cc
Moisture Count 2 66 g/cc
Moisture Count 3 63 g/cc
Sum of Count or Density 2192 g/cc
Average of Count or Density 731 g/cc
Sum of Moisture Count 193 g/cc
Average of Moisture Count 64 g/cc
Count Ratio Density 0.45
Count Ratio Moisture 0.11
Calculated Percent Relative Compaction 97.1 %
Reported Percent Relative Compaction 97 %

Test

DIME Test ID: 2026-06-15-86-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 08/18/2026
Date Tested: 06/15/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: james.holloway@dot.ca.gov
Organization Phone: (951) 232-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.37
Highest adjust wet density 2.44
Relative compaction 97
% Moisture no data
Optimum Moisture no data