Print Report | Back to Sample Detail

Sample Record for 2018-04-03-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212060 DEA: 010F5204 EFIS: 0116000016 QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-101-R8.5/R22.4
Work Description: RUBBERIZED HMA OVERLAY
Location Description: HUMBOLDT COUNTY AT VARIOUS LOCATIONS FROM 0.1 MILE SOUTH OF BENBOW OVERCROSSING TO FRENCH ROAD UNDERCROSSING
Contractor Name: MERCER-FRASER COMPANY
Contractor Address: Unknown
Resident Engineer: Joaquin Rodriguez Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-04-03-2
TL Number from the TL Form: 865191
Sample Submitted By Organization: CT D01 - District 1 Materials Laboratory
Sample Organization Contact: (707) 496-0974
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/03/2018
Date that the sample was received by the laboratory/organization performing the testing: 04/04/2018
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2 RHMA-G
From where was the sample collected: Job Site
Laboratory sample identification: 61916
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mercer Fraser Plant A

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 2

Test Results

Test

DIME Test ID: 2018-04-03-2-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/05/2018
Date Tested: 04/05/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1050 River Ranch Road,
Organization City: Fortuna
Organization State: California
Organization Zipcode: 95540
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test: OBC 7.7% Target Value 7.3-8.2% Ton 290
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 9.05 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data

Test

DIME Test ID: 2018-04-03-2-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/05/2018
Date Tested: 04/05/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1050 River Ranch Road,
Organization City: Fortuna
Organization State: California
Organization Zipcode: 95540
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test: Ton 290
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Specific Gravity for Sample 1 2.297
Theoretical maximum density at 25°C (77°F) no data