Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001153 DEA: 081L3104 EFIS: 0820000020
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-11.8/17.3
Work Description: RHMA (GAP GRADED), REPLACE AC SURF, AND COLD PLANE AC PVMT.
Location Description: RIVERSIDE COUNTY IN LAKE ELSINORE FROM GRAND AVENUE TO ROUTE 15/74 SEPARATION
Contractor Name: R.J. NOBLE COMPANY
Contractor Address: Unknown
Resident Engineer: Xavier Avila Structure Rep.: Unknown
DIME Sample ID: 2026-06-10-88
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9512323690
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/10/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/18/2026
The quantity of what the sample constitutes: 1 box, 6 cores
A brief description of the sample: RHMA-G SP 1/2"
From where was the sample collected: Job Site
Laboratory sample identification: 19A, 19B, 19C, 20A, 20B, 20C
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: R.J. Noble Co. — Corona
DIME Test ID: 2026-06-10-88-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 07/08/2026
Date Tested: 06/15/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water
|
7339.1 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
1585.5 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8258.4 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.38
|
|
Theoretical maximum density at 25°C (77°F)
|
148.1 lb/ft^3
|
DIME Test ID: 2026-06-10-88-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 07/08/2026
Date Tested: 06/19/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: 19A, 19B, 19C
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.198
|
|
Bulk Specific Gravity 2
|
2.207
|
|
Bulk Specific Gravity 3
|
2.165
|
|
Average Bulk Specific Gravity
|
2.19
|
DIME Test ID: 2026-06-10-88-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 07/08/2026
Date Tested: 06/19/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: 20A, 20B, 20C
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.215
|
|
Bulk Specific Gravity 2
|
2.225
|
|
Bulk Specific Gravity 3
|
2.182
|
|
Average Bulk Specific Gravity
|
2.207
|
