Print Report | Back to Sample Detail

Sample Record for 2026-06-16-84

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001960 DEA: 081J65U4 EFIS: 0824000091 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-10-0.0/R8.2
Work Description: HMA, RHMA, JPCP, JPCP(RSC), and individual slab replacement (RSC).
Location Description:
Contractor Name: Flatiron Dragados
Contractor Address: 12121 scripps Summit Drive, suite 400, Sandeigo, CA 92131
Resident Engineer: Sadique Hossain Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-06-16-84
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9512323690
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/16/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/26/2026
The quantity of what the sample constitutes: 1 box, 3 cores
A brief description of the sample: 3/4" HMA-A SP
From where was the sample collected: Job Site
Laboratory sample identification: 17B, 17C, 18A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt — Corona

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 105793
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 2

Test Results

Test

DIME Test ID: 2026-06-16-84-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 07/07/2026
Date Tested: 06/17/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7399.2 grams
Mass of oven-dry sample in air for Sample 1 2577 grams
Mass of container filled with the sample and water for Sample 1 8970.2 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.562
Theoretical maximum density at 25°C (77°F) 159.5 lb/ft^3

Test

DIME Test ID: 2026-06-16-84-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 07/07/2026
Date Tested: 06/26/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: 17B, 17C, 18A
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.388
Bulk Specific Gravity 2 2.406
Bulk Specific Gravity 3 2.372
Average Bulk Specific Gravity 2.389