Print Report | Back to Sample Detail

Sample Record for 2026-06-25-100

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001324 DEA: 061E8804 EFIS: 0622000111 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-180-24.6/41.1,43.8/53.3
Work Description: Cold plane, HMA paving and pavement delineation.
Location Description: FRESNO COUNTY IN AND NEAR KERMAN FROM BELMONT AVENUE TO MODOC AVENUE AND FROM 0.2 MILE EAST OF GOLDENROD AVENUE TO 0.3 MILE WEST OF BRAWLEY AVENUE
Contractor Name: PAVE-TECH, INC.
Contractor Address: 3043 Harding Street, Carlsbad, CA 92008
Resident Engineer: Joseph Lopez Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-06-25-100
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Millbrook Field Laboratory
Sample Organization Contact: (559) 341-3953
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/25/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/25/2026
The quantity of what the sample constitutes: 24 Boxes HMA
A brief description of the sample: 1/2" HMA
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Madera Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 1
HMA Mix Number:
Binder content (%): 4.4
Virgin binder PG: PG 70-10
Design binder PG: PG 70-10
Binder Supplier: SJR
RAP content (%): 15
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test

DIME Test ID: 2026-06-25-100-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/08/2026
Date Tested: 07/02/2026
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 341-3953
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 2925.1 g
Mass of the specimen and specimen basket assembly prior to ignition 4700.6 g
Corrected Asphalt Binder Content 4.25 %
Mass of HMA Sample prior to ignition 1775.5 g
Mass Loss 87.8 g
Mass of aggregate remaining after ignition 1687.7 g
Correction Factor (Percent by mass of HMA Specimen) 0.53 %
Moisture Content no data0 %
Temperature Compensation Factor 0.17 %
Test Temperature 538 C