Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000786 DEA: 081J4504 EFIS: 0818000043
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-243-0.0/29.7
Work Description: HMA, THERMOPLASTIC TRAFFIC STRIPE, AND COLD PLANE AC PAVEMENT.
Location Description: RIVERSIDE COUNTY FROM ROUTE 74 AT MOUNTAIN CENTER TO ROUTE 10 IN BANNING
Contractor Name: ALL AMERICAN ASPHALT
Contractor Address: 400 EAST 6TH ST, CORONA, CA 92879
Resident Engineer: Md Rahman Structure Rep.: Unknown
DIME Sample ID: 2026-06-25-60
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Sample Organization Contact: (760) 252-9216
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/25/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/25/2026
The quantity of what the sample constitutes: 2 box 5 cores
A brief description of the sample: 3/4" WMA-A
From where was the sample collected: Job Site
Laboratory sample identification: 28ABC, 29AB
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt Perris
DIME Test ID: 2026-06-25-60-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/30/2026
Date Tested: 06/29/2026
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.366
|
|
Bulk Specific Gravity 2
|
2.349
|
|
Bulk Specific Gravity 3
|
2.357
|
|
Average Bulk Specific Gravity
|
2.357
|
DIME Test ID: 2026-06-25-60-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/30/2026
Date Tested: 06/29/2026
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.37
|
|
Bulk Specific Gravity 2
|
2.376
|
|
Average Bulk Specific Gravity
|
2.373
|
DIME Test ID: 2026-06-25-60-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/30/2026
Date Tested: 06/26/2026
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Specific Gravity for Sample 1
|
2.52
|
|
Theoretical maximum density at 25°C (77°F)
|
2512.7 kg/m^3
|