Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000786 DEA: 081J4504 EFIS: 0818000043
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-243-0.0/29.7
Work Description: HMA, THERMOPLASTIC TRAFFIC STRIPE, AND COLD PLANE AC PAVEMENT.
Location Description: RIVERSIDE COUNTY FROM ROUTE 74 AT MOUNTAIN CENTER TO ROUTE 10 IN BANNING
Contractor Name: ALL AMERICAN ASPHALT
Contractor Address: 400 EAST 6TH ST, CORONA, CA 92879
Resident Engineer: Md Rahman Structure Rep.: Unknown
DIME Sample ID: 2026-06-17-84
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/17/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/19/2026
The quantity of what the sample constitutes: 115.23 tons
A brief description of the sample: 3/4" WMA_A
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt Perris
DIME Test ID: 2026-06-17-84-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/02/2026
Date Tested: 06/25/2026
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Corrected Asphalt Binder Content
|
4.77 %
|
|
Mass of HMA Sample prior to ignition
|
2175.5 g
|
|
Mass Loss
|
117.5 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.49 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.14 %
|
|
Test Temperature
|
538 C
|