Print Report | Back to Sample Detail

Sample Record for 2026-06-15-54

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001609 DEA: 040AA244 EFIS: 0419000455 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC, -680-R0.0/R7.7
Work Description: INDIVIDUAL SLAB REPLACEMENT, COLD PLAN AC PVMT, GRIND EXIST CONC PVMT.
Location Description: CONTRA COSTA COUNTY IN SAN RAMON AND DANVILLE FROM THE ALAMEDA COUNTY LINE TO 0.2 MILE NORTH OF DIABLO ROAD UNDERCROSSING
Contractor Name: Bay Cities Paving and Grading
Contractor Address: 1450 Civic Ct., Bldg B #400, Concord, CA 94520
Resident Engineer: Eddie Dike Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-06-15-54
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Sample Organization Contact: (510) 224-6127
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/15/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/16/2026
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4"HMA w/25% RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Pleasanton Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test

DIME Test ID: 2026-06-15-54-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/22/2026
Date Tested: 06/22/2026
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: PSUE Sample (Burn #1)
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3548.9 g
Mass of the specimen and specimen basket assembly prior to ignition 5630 g
Corrected Asphalt Binder Content 4.58 %
Mass of HMA Sample prior to ignition 2081.1 g
Mass Loss 126.9 g
Mass of aggregate remaining after ignition 1954.2 g
Correction Factor (Percent by mass of HMA Specimen) 1.38 %
Moisture Content no data0 %
Temperature Compensation Factor 0.14 %
Test Temperature 481 C

Test

DIME Test ID: 2026-06-15-54-2
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/22/2026
Date Tested: 06/22/2026
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: PSUE Sample (Burn #2)
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3558.9 g
Mass of the specimen and specimen basket assembly prior to ignition 5670.1 g
Corrected Asphalt Binder Content 4.75 %
Mass of HMA Sample prior to ignition 2111.2 g
Mass Loss 132.1 g
Mass of aggregate remaining after ignition 1979.1 g
Correction Factor (Percent by mass of HMA Specimen) 1.38 %
Moisture Content no data0 %
Temperature Compensation Factor 0.13 %
Test Temperature 482 C

Test

DIME Test ID: 2026-06-15-54-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/24/2026
Date Tested: 06/17/2026
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 1 SL. 1
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.356
Bulk Specific Gravity 2 2.374
Average Bulk Specific Gravity 2.365

Test

DIME Test ID: 2026-06-15-54-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 06/24/2026
Date Tested: 06/22/2026
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 1 SL. 1
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 5.8 %
Percent Air Voids 2 5.2 %
Average Percent Air Voids 5.5 %
Average Core Density 94.5 %