Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001669 DEA: 09379004 EFIS: 0919000004
QA Service Level: 1
DIST-CO-RTE-PM: 09-INY-395-R65.0/76.0
Work Description: FULL DEPTH RECYCLING, COLD PLANE, HMA AND CURB RAMPS.
Location Description: INYO COUNTY AT AND NEAR INDEPENDENCE FROM 3 MILES SOUTH OF MANZANAR REWARD ROAD TO 0.3 MILE NORTH OF SHABBELL LANE
Contractor Name: ROAD AND HIGHWAY BUILDERS LLC
Contractor Address: 950 E MUSTANG RD, SPARKS NV 89434
Resident Engineer: Garrett Rottner Structure Rep.: Unknown
DIME Sample ID: 2026-06-12-21
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/12/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/16/2026
The quantity of what the sample constitutes: 3 Cores for HMA-5
A brief description of the sample: 3/4" HMA with RAP
From where was the sample collected: Job Site
Laboratory sample identification: HMA Cores 5
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Grinding Rock - Independence
DIME Test ID: 2026-06-12-21-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/23/2026
Date Tested: 06/23/2026
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: Cores 05
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.341
|
|
Bulk Specific Gravity 2
|
2.338
|
|
Bulk Specific Gravity 3
|
2.349
|
|
Average Bulk Specific Gravity
|
2.343
|
DIME Test ID: 2026-06-12-21-3
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 06/23/2026
Date Tested: 06/23/2026
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: Core 5 Density: 5A=93.6%, 5B=94.0%, 5C=94.5%
Test Result Compliance: complies
Additional Comments When Verified:
|
Percent Air Voids
|
6.4 %
|
|
Percent Air Voids 2
|
6 %
|
|
Percent Air Voids 3
|
5.5 %
|
|
Average Percent Air Voids
|
6 %
|
|
Average Core Density
|
94 %
|