Print Report | Back to Sample Detail

Sample Record for 2026-06-12-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1002310 DEA: 010P6404 EFIS: 0125000053 QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-101-R131.7/134.6
Work Description: Boyes Creek Viaduct
Location Description:
Contractor Name: GR Sundberg Inc
Contractor Address: 5211 Boyd Road, Arcata CA, 95521
Resident Engineer: Ryan Dunne Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-06-12-2
TL Number from the TL Form:
Sample Submitted By Organization: CT D01 - Boyd Road Field Laboratory
Sample Organization Contact: (707) 496-0974
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/12/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/12/2026
The quantity of what the sample constitutes: 4 boxs
A brief description of the sample: 1/2 RHMA PG 64-16
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mercer Fraser Boyd Road

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test

DIME Test ID: 2026-06-12-2-3
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/12/2026
Date Tested: 06/12/2026
Submitted By Organization: CT D01 - Boyd Road Field Laboratory
Organization Address: 1050 River Ranch Road,
Organization City: Fortuna
Organization State: California
Organization Zipcode: 95540
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3922.4 g
Mass of the specimen and specimen basket assembly prior to ignition 5458.4 g
Corrected Asphalt Binder Content 7.73 %
Mass of HMA Sample prior to ignition 1536 g
Mass Loss 135.3 g
Mass of aggregate remaining after ignition 1400.7 g
Correction Factor (Percent by mass of HMA Specimen) 0.95 %
Moisture Content 0.13 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C