Print Report | Back to Sample Detail

Sample Record for 2026-05-20-86

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001940 DEA: 023J52U4 EFIS: 0225000084 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-36-15.7/16.4
Work Description: Horse Gulch Combined
Location Description:
Contractor Name: JF Shea Constrcution
Contractor Address: 17400 Clear Creek Road, Redding, CA 96001
Resident Engineer: Damion Farley Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-05-20-86
TL Number from the TL Form: 854564
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Assurance
Type of Material: Asphalt Binder
Sample Taken Date: 05/20/2026
Date that the sample was received by the laboratory/organization performing the testing: 06/08/2026
The quantity of what the sample constitutes: 2, 1 QUART CANS
A brief description of the sample: 2 CANS OF BINDER
From where was the sample collected: Source
Laboratory sample identification: 080205
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JF SHEA CLEAR CREEK

Material Information

Performance Grade: PG 58-22
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier: JF SHEA CLEAR CREEK
Certified Asphalt Supplier: Albina Asphalt - Klamath Falls - Klamath Falls OR
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
Test results on following page(s): 1

Test Results

Test

DIME Test ID: 2026-05-20-86-1
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 06/11/2026
Date Tested: 06/09/2026
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: OG
Test Result Compliance: complies
Additional Comments When Verified:
Phase Original binder
Test Gap 1 mm
Test Frequency 10.0 rad/s
Strain Amplitude 12.06 %
Stress Amplitude 0.212 kPa
Phase Angle (δ) (for the 10 cycles) 86.0 degree
Complex Modulus (G*) (for the 10 measurements) 1.759 kPa
Test Temperature (Specimen 1) 58.0 C
Dynamic Shear, G*/sin(δ) 1.76 kPa