Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001153 DEA: 081L3104 EFIS: 0820000020
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-11.8/17.3
Work Description: RHMA (GAP GRADED), REPLACE AC SURF, AND COLD PLANE AC PVMT.
Location Description: RIVERSIDE COUNTY IN LAKE ELSINORE FROM GRAND AVENUE TO ROUTE 15/74 SEPARATION
Contractor Name: R.J. NOBLE COMPANY
Contractor Address: Unknown
Resident Engineer: Xavier Avila Structure Rep.: Unknown
DIME Sample ID: 2026-05-14-57
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9512323690
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/14/2026
Date that the sample was received by the laboratory/organization performing the testing: 05/22/2026
The quantity of what the sample constitutes: 1 box, 6 cores
A brief description of the sample: RHMA-G SP 1/2"
From where was the sample collected: Job Site
Laboratory sample identification: 5A, 5B, 5C, 6A, 6B, 6C
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: R.J. Noble Co. — Corona
DIME Test ID: 2026-05-14-57-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/01/2026
Date Tested: 05/21/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Manual Agitation - Method B
|
|
Mass of container filled with water
|
7340 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
1549.1 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8243.4 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.399
|
|
Theoretical maximum density at 25°C (77°F)
|
149.3 lb/ft^3
|
DIME Test ID: 2026-05-14-57-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/01/2026
Date Tested: 05/26/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: 5A, 5B, 5C
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.24
|
|
Bulk Specific Gravity 2
|
2.194
|
|
Bulk Specific Gravity 3
|
2.242
|
|
Average Bulk Specific Gravity
|
2.225
|
DIME Test ID: 2026-05-14-57-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/01/2026
Date Tested: 05/26/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: 6A, 6B, 6C
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.222
|
|
Bulk Specific Gravity 2
|
2.215
|
|
Bulk Specific Gravity 3
|
2.213
|
|
Average Bulk Specific Gravity
|
2.217
|
