Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000513 DEA: 020J8504 EFIS: 0219000168
QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-89-21/R34.622
Work Description: MCCLOUD CAPM - PAVEMENT REHABILITATION
Location Description: IN SISKIYOU COUNTY AT AND NEAR MCCLOUD FROM 0.1 MILE SOUTH OF MUD CREEK BRIDGE TO ROUTE 5
Contractor Name: TULLIS, INC.
Contractor Address: Unknown
Resident Engineer: Austin Henry Structure Rep.: Unknown
DIME Sample ID: 2026-05-05-52
TL Number from the TL Form: 875618
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/05/2026
Date that the sample was received by the laboratory/organization performing the testing: 05/05/2026
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: 16 boxes of Unverified Lime Treated 1/2-inch Type A (eq. PG 64-16)
From where was the sample collected: Manufacturer
Laboratory sample identification: D80189
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis — Northstate Asphalt (Redding, CA)
HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 01
HMA Mix Number: 2603P01
Binder content (%): 5.2
Virgin binder PG: PG 58-22
Design binder PG: PG 64-16
Binder Supplier: Albina (Klamath Falls, OR)
RAP content (%): 25
WMA Additives: No
Antistrip type: Lime
DIME Test ID: 2026-05-05-52-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/21/2026
Date Tested: 05/18/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Pb=5.63%
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
3045.2 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
4791.3 g
|
|
Mass of HMA Sample prior to ignition
|
1746.1 g
|
|
Corrected Asphalt Binder Content
|
5.63 %
|
|
Mass Loss
|
111.6 g
|
|
Mass of aggregate remaining after ignition
|
1634.5 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.59 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.17 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2026-05-05-52-2
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 05/21/2026
Date Tested: 05/19/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Post-production gradation: sample is coarse on the 3/4-inch sieve, 99% passing, and the 1/2-inch sieve, 89% passing.
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Is an aggregate correction factor used?
|
Yes
|
|
Aggregate correction factor for the 2 in. sieve (% passing)
|
no data0 %
|
|
Aggregate correction factor for the 1 1/2 in. sieve (% passing)
|
no data0 %
|
|
Aggregate correction factor for the 1 in. sieve (% passing)
|
no data0 %
|
|
Aggregate correction factor for the 3/4 in. sieve (% passing)
|
-0.2 %
|
|
Aggregate correction factor for the 1/2 in. sieve (% passing)
|
-2.5 %
|
|
Aggregate correction factor for the 3/8 in. sieve (% passing)
|
2.1 %
|
|
Aggregate correction factor for the #4 sieve (% passing)
|
-2.5 %
|
|
Aggregate correction factor for the #8 sieve (% passing)
|
-1.8 %
|
|
Aggregate correction factor for the #16 sieve (% passing)
|
-2 %
|
|
Aggregate correction factor for the #30 sieve (% passing)
|
-1.7 %
|
|
Aggregate correction factor for the #50 sieve (% passing)
|
-1.4 %
|
|
Aggregate correction factor for the #100 sieve (% passing)
|
-1.2 %
|
|
Aggregate correction factor for the #200 sieve (% passing)
|
-1.2 %
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
99 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
89 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
81 %
|
|
Cumulative percent passing the #4 sieve
|
49 %
|
|
Cumulative percent passing the #8 sieve
|
33 %
|
|
Cumulative percent passing the #16 sieve
|
22 %
|
|
Cumulative percent passing the #30 sieve
|
16 %
|
|
Cumulative percent passing the #50 sieve
|
12 %
|
|
Cumulative percent passing the #100 sieve
|
9 %
|
|
Cumulative percent passing the #200 sieve
|
6.6 %
|
DIME Test ID: 2026-05-05-52-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/21/2026
Date Tested: 05/06/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Gmm=2.500
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water
|
7331.1 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
1657.2 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8325.3 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.5
|
|
Theoretical maximum density at 25°C (77°F)
|
2492.8 kg/m^3
|
DIME Test ID: 2026-05-05-52-4
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/21/2026
Date Tested: 05/07/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Gmb=2.429
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.432
|
|
Bulk Specific Gravity 2
|
2.425
|
|
Bulk Specific Gravity 3
|
2.428
|
|
Average Bulk Specific Gravity
|
2.428
|
DIME Test ID: 2026-05-05-52-5
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 05/21/2026
Date Tested: 05/07/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: AASHTO T 269:
Pa=2.8%;
MS-2:
VMA=13.1%,
VFA=78.3%,
DP=1.5
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Percent Air Voids
|
2.7 %
|
|
Percent Air Voids 2
|
3 %
|
|
Percent Air Voids 3
|
2.9 %
|
|
Average Percent Air Voids
|
2.9 %
|
DIME Test ID: 2026-05-05-52-6
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 05/21/2026
Date Tested: 05/20/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: S1=143psi,
S2=140.psi,
TSR=98%
Test Result Compliance: complies
Additional Comments When Verified:
|
Unit system used?
|
SI Units
|
|
Average Dry Tensile Strength
|
142 psi
|
|
Average Wet Tensile Strength
|
139 psi
|
|
Tensile Strength Ratio
|
0.98
|
DIME Test ID: 2026-05-05-52-7
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Verified Date: 06/01/2026
Date Tested: 05/14/2026
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: CT 360:
SA=0.3g/cm²;
CT 389:
Rut=0.1in.@N₁₅₀₀₀,
Nf>15000,
SIP>15000
Test Result Compliance: complies
Additional Comments When Verified:
|
Specimen Preparation Method
|
PMLC
|
|
Test Temperature
|
122 F
|
|
Air Void Content for specimen A-1
|
7.3 %
|
|
Air Void Content for specimen A-2
|
7.4 %
|
|
Air Void Content for specimen B-1
|
7.3 %
|
|
Air Void Content for specimen B-2
|
7.1 %
|
|
Stripping Inflection Point (Wheel A)
|
>15000
|
|
Stripping Inflection Point (Wheel B)
|
>15000
|
|
Maximum impression at 5000 passes (left wheel)
|
2.25 mm
|
|
Maximum impression at 5000 passes (right wheel)
|
2.11 mm
|
|
Average impression at 5000 passes (left/right avg)
|
2.18 mm
|
|
Maximum impression at 10000 passes (left wheel)
|
2.65 mm
|
|
Maximum impression at 10000 passes (right wheel)
|
2.51 mm
|
|
Average impression at 10000 passes (left/right avg)
|
2.58 mm
|
|
Maximum impression at 15000 passes (left wheel)
|
2.95 mm
|
|
Maximum impression at 15000 passes (right wheel)
|
2.79 mm
|
|
Average impression at 15000 passes (left/right avg)
|
2.87 mm
|
|
Average impression at 20000 passes (left/right avg)
|
no data
|
|
Average impression at 25000 passes (left/right avg)
|
no data
|
