Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001669 DEA: 09379004 EFIS: 0919000004
QA Service Level: 1
DIST-CO-RTE-PM: 09-INY-395-R65.0/76.0
Work Description: FULL DEPTH RECYCLING, COLD PLANE, HMA AND CURB RAMPS.
Location Description: INYO COUNTY AT AND NEAR INDEPENDENCE FROM 3 MILES SOUTH OF MANZANAR REWARD ROAD TO 0.3 MILE NORTH OF SHABBELL LANE
Contractor Name: ROAD AND HIGHWAY BUILDERS LLC
Contractor Address: 950 E MUSTANG RD, SPARKS NV 89434
Resident Engineer: Garrett Rottner Structure Rep.: Unknown
DIME Sample ID: 2026-05-20-55
TL Number from the TL Form: 5322
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/20/2026
Date that the sample was received by the laboratory/organization performing the testing: 05/21/2026
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4" HMA Cores
From where was the sample collected: Job Site
Laboratory sample identification: CR-01
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: RHB Plant Independence
DIME Test ID: 2026-05-20-55-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/21/2026
Date Tested: 05/21/2026
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: Core 1
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.317
|
|
Bulk Specific Gravity 2
|
2.315
|
|
Bulk Specific Gravity 3
|
2.345
|
|
Average Bulk Specific Gravity
|
2.326
|
DIME Test ID: 2026-05-20-55-3
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 05/21/2026
Date Tested: 05/21/2026
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: CR-1A=93.8%. CR-1B=93.7%, CR-1C=95.0%
Test Result Compliance: complies
Additional Comments When Verified:
|
Percent Air Voids
|
6.2 %
|
|
Percent Air Voids 2
|
6.3 %
|
|
Percent Air Voids 3
|
5 %
|
|
Average Percent Air Voids
|
5.8 %
|
|
Average Core Density
|
94.2 %
|