Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001645 DEA: 051R1004 EFIS: 0523000125
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO, -1-32.6
Work Description: BRIDGE REPLACEMENT, HMA, AND RSP PROTECTION.
Location Description: SAN LUIS OBISPO COUNTY NEAR MORRO BAY AT TORO CREEK BRIDGE
Contractor Name: SOUZA CONSTRUCTION
Contractor Address: 4027 Santa Fe Road, San Luis Obispo, CA 93403
Resident Engineer: Dean Russu Structure Rep.: Dave Lewis
DIME Sample ID: 2026-05-07-59
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (213) 505-4213
Type of Sample: Quality Assurance
Type of Material: SMTL TM4 - Prestressing Strand
Sample Taken Date: 05/07/2026
Date that the sample was received by the laboratory/organization performing the testing: 05/13/2026
The quantity of what the sample constitutes: 4
A brief description of the sample: Epoxy Coated Strand
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sumiden
Comments:
Reel/Coil/Pack Number(s): T301173-9-1, T350346-8-1, T350346-9-1, T350358-9-1
Number of Coils:
Group Number:
Strand Diameter: .6 in
Grade: 270
Strand Specification: ASTM A 882
Heat Number(s): T1376429, T1378378, T1378378, T1380079
Mfg. Lot Number(s): NA
Manufacturer(s): Sumiden
DIME Test ID: 2026-05-07-59-2
Test Method: ASTM A882-20: Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand (Withdrawn 2019) (Coating Adhesion)
Verified Date: 05/20/2026
Date Tested: 05/20/2026
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test: T301173-9-1
Test Result Compliance: complies
Additional Comments When Verified:
|
Coating Adhesion Pass/Fail
|
Pass
|
DIME Test ID: 2026-05-07-59-3
Test Method: ASTM A882-20: Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand (Withdrawn 2019) (Coating Adhesion)
Verified Date: 05/20/2026
Date Tested: 05/20/2026
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test: T350346-8-1
Test Result Compliance: complies
Additional Comments When Verified:
|
Coating Adhesion Pass/Fail
|
Pass
|
DIME Test ID: 2026-05-07-59-4
Test Method: ASTM A882-20: Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand (Withdrawn 2019) (Coating Adhesion)
Verified Date: 05/20/2026
Date Tested: 05/20/2026
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test: T350346-9-1
Test Result Compliance: complies
Additional Comments When Verified:
|
Coating Adhesion Pass/Fail
|
Pass
|
DIME Test ID: 2026-05-07-59-5
Test Method: ASTM A882-20: Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand (Withdrawn 2019) (Coating Adhesion)
Verified Date: 05/20/2026
Date Tested: 05/20/2026
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test: T350358-9-1
Test Result Compliance: complies
Additional Comments When Verified:
|
Coating Adhesion Pass/Fail
|
Pass
|
