Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 44444 DEA: ASCP EFIS: ASCP
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2026-05-15-9
TL Number from the TL Form:
Sample Submitted By Organization: Wright Asphalt
Sample Organization Contact: (806) 679-0747
Type of Sample: Quality Control
Type of Material: Asphalt Binder
Sample Taken Date: 05/15/2026
Date that the sample was received by the laboratory/organization performing the testing: 05/15/2026
The quantity of what the sample constitutes: 1 of 1
A brief description of the sample: In-line Blend
From where was the sample collected: Manufacturer
Laboratory sample identification: 051526-6428M-001
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Casa Grande, AZ
Performance Grade: PG 64-28 M
Modified: Yes
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Wright Asphalt Products Company - Casa Grande AZ
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2026-05-15-9-1
Test Method: AASHTO T316-22: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Is viscosity reading in cP/Pa-s?
|
Pa-s
|
|
Time of test
|
no data
|
|
Test Temperature
|
no data
|
|
Speed
|
no data
|
|
Spindle size
|
no data
|
|
Torque
|
no data
|
|
Viscosity reading #1 (A)
|
no data
|
|
Viscosity reading #2 (B)
|
no data
|
|
Viscosity reading #3 (C)
|
no data
|
|
Average viscosity
|
1 Pa-s
|
DIME Test ID: 2026-05-15-9-2
Test Method: AASHTO T48-20: Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Units of measurement for Observed Flash Point (C or F) and Ambient barometric pressure (kP or mmHg)
|
Celsius and mmHg
|
|
Corrected Flash Point
|
no data
|
DIME Test ID: 2026-05-15-9-3
Test Method: AASHTO T301-22: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
% Elongation Recovery
|
81 %
|
DIME Test ID: 2026-05-15-9-4
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear, G*/sin(δ)
|
2.19 kPa
|
DIME Test ID: 2026-05-15-9-5
Test Method: AASHTO T240-23: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Is mass change based on one or two containers?
|
One
|
|
Is mass change correction factor needed?
|
no data
|
DIME Test ID: 2026-05-15-9-6
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
RTFO residue
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear, G*/sin(δ)
|
3.15 kPa
|
DIME Test ID: 2026-05-15-9-7
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
RTFO residue two specimens
|
|
Test Plate Diameter
|
no data
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear, G*/sin(δ)
|
no data
|
|
Phase Angle 2 (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear 2, G*/sin(δ)
|
no data
|
|
Delta at 2.2 kpa
|
70.0 degree
|
DIME Test ID: 2026-05-15-9-8
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
PAV residue
|
|
Test Plate Diameter
|
no data
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
(G*) x sin(δ)=
|
2463 kPa
|
DIME Test ID: 2026-05-15-9-9
Test Method: AASHTO T313-2025: Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Maximum test bath temperature at 240 S
|
no data
|
|
Minimum test bath temperature at 240 S
|
no data
|
|
Estimated Stiffness Modulus 8.0 s
|
no data
|
|
Estimated m-value 8.0 s
|
no data
|
|
Estimated Stiffness Modulus 15.0 s
|
no data
|
|
Estimated m-value 15.0 s
|
no data
|
|
Estimated Stiffness Modulus 30.0 s
|
no data
|
|
Estimated m-value 30.0 s
|
no data
|
|
Estimated Stiffness Modulus 60.0 s
|
188.000 MPa
|
|
Estimated m-value 60.0 s
|
no data
|
|
Estimated Stiffness Modulus 120.0 s
|
no data
|
|
Estimated m-value 120.0 s
|
no data
|
|
Estimated Stiffness Modulus 240.0 s
|
no data
|
|
Estimated m-value 240.0 s
|
no data
|
DIME Test ID: 2026-05-15-9-10
Test Method: AASHTO T313-2025: Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 05/15/2026
Date Tested: 05/15/2026
Submitted By Organization: Wright Asphalt
Organization Address: 110 South Commerce Street,
Organization City: Casa Grande
Organization State: CA
Organization Zipcode: 85193
Organization Email: ahamer@wrightasphalt.com
Organization Phone: (806) 679-0747
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Maximum test bath temperature at 240 S
|
no data
|
|
Minimum test bath temperature at 240 S
|
no data
|
|
Estimated Stiffness Modulus 8.0 s
|
no data
|
|
Estimated m-value 8.0 s
|
no data
|
|
Estimated Stiffness Modulus 15.0 s
|
no data
|
|
Estimated m-value 15.0 s
|
no data
|
|
Estimated Stiffness Modulus 30.0 s
|
no data
|
|
Estimated m-value 30.0 s
|
no data
|
|
Estimated Stiffness Modulus 60.0 s
|
no data
|
|
Estimated m-value 60.0 s
|
0.320
|
|
Estimated Stiffness Modulus 120.0 s
|
no data
|
|
Estimated m-value 120.0 s
|
no data
|
|
Estimated Stiffness Modulus 240.0 s
|
no data
|
|
Estimated m-value 240.0 s
|
no data
|
