Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 995493 DEA: 081G6704 EFIS: 0816000049
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-79-5.4/11.4
Work Description: HOT MIX ASPHALT, SOIL NAIL, STRUCTURAL CONCRETE AND ROADWAY EXC.
Location Description: RIVERSIDE COUNTY NEAR TEMECULA FROM 0.4 MILE SOUTH OF SAGE ROAD TO 1.1 MILES SOUTH OF PAUBA ROAD
Contractor Name: ORTIZ ENTERPRISES, INC.
Contractor Address: 6 CUSHING STE 200, IRVINE, CA 92618
Resident Engineer: Osama Abdalla Structure Rep.: Arnel Vega
DIME Sample ID: 2026-04-28-45
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9512323690
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/28/2026
Date that the sample was received by the laboratory/organization performing the testing: 05/01/2026
The quantity of what the sample constitutes: 1 box, 4 cores
A brief description of the sample: 3/4" HMA A SP
From where was the sample collected: Job Site
Laboratory sample identification: 1A34, 1B34, 1C34, 1A35
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: R.J. Noble Co. — Corona
DIME Test ID: 2026-04-28-45-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/06/2026
Date Tested: 05/04/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water
|
7338.9 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2550.4 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8863 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.485
|
|
Theoretical maximum density at 25°C (77°F)
|
154.7 lb/ft^3
|
DIME Test ID: 2026-04-28-45-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/06/2026
Date Tested: 05/05/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: 1A34, 1B34, 1C34
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.351
|
|
Bulk Specific Gravity 2
|
2.338
|
|
Bulk Specific Gravity 3
|
2.356
|
|
Average Bulk Specific Gravity
|
2.348
|
DIME Test ID: 2026-04-28-45-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/06/2026
Date Tested: 05/05/2026
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: 1A35
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.337
|
