Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001468 DEA: 081L2404 EFIS: 0819000167
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-95-R57.2/64.5
Work Description: RHMA (GAP GRADED), REPLACE AC SURFACING, AND COLD PLANE AC PVMT.
Location Description: SAN BERNARDINO COUNTY NEAR NEEDLES FROM ROUTE 40/95 SEPARATION TO 0.5 MILE NORTH OF GOFFS ROAD
Contractor Name: SULLY - MILLER CONTRACTING COMPANY
Contractor Address: 135 S STATE COLLEGE BLVD. 400, BREA, CA 92821
Resident Engineer: Anthony Doan Structure Rep.: Unknown
DIME Sample ID: 2026-04-22-43
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Sample Organization Contact: (760) 252-9216
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/22/2026
Date that the sample was received by the laboratory/organization performing the testing: 04/22/2026
The quantity of what the sample constitutes: 1 box HMA and 5 cores
A brief description of the sample: 3/4" RHMA-G
From where was the sample collected: Job Site
Laboratory sample identification: 23A, 23B, 23C, 24A, 24B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Diamond-Victorville
DIME Test ID: 2026-04-22-43-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/29/2026
Date Tested: 04/28/2026
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.237
|
|
Bulk Specific Gravity 2
|
2.209
|
|
Bulk Specific Gravity 3
|
2.229
|
|
Average Bulk Specific Gravity
|
2.225
|
DIME Test ID: 2026-04-22-43-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/29/2026
Date Tested: 04/28/2026
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.239
|
|
Bulk Specific Gravity 2
|
2.253
|
|
Average Bulk Specific Gravity
|
2.246
|
DIME Test ID: 2026-04-22-43-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/29/2026
Date Tested: 04/24/2026
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Specific Gravity for Sample 1
|
2.372
|
|
Theoretical maximum density at 25°C (77°F)
|
2365.1 kg/m^3
|