Print Report | Back to Sample Detail

Sample Record for 2025-11-07-97

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000567 DEA: 042K7404 EFIS: 0417000018 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-37-R11.2/14.5
Work Description: COLD PLANE AC PVMT, PLACE RHMA AND REPLACE CONCRETE BARRIER.
Location Description: MARIN COUNTY IN AND NEAR NOVATO FROM IGNACIO OVERHEAD TO PETALUMA RIVER BRIDGE
Contractor Name: BAY CITIES PAVING & GRADING, INC.
Contractor Address: 1450 Civic Street, Concord, CA 94520
Resident Engineer: Christopher Prokop Structure Rep.: Jeremy Light

Sample Information

DIME Sample ID: 2025-11-07-97
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 11/07/2025
Date that the sample was received by the laboratory/organization performing the testing: 11/07/2025
The quantity of what the sample constitutes: 2 bags
A brief description of the sample: 1/2" RHMA-G SP64-16 CRM
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Lake Herman

Material Information

Source Identification (SMARA, name of Pit or Job Site): Vulcan Lake Herman
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: source
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number: 1
Sublot number: 15
Aggregate Mix Number:

Test Results

Test

DIME Test ID: 2025-11-07-97-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 04/06/2026
Date Tested: 11/18/2025
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 94 %
Cumulative percent passing the 3/8 in. sieve 82 %
Cumulative percent passing the #4 sieve 38 %
Cumulative percent passing the #8 sieve 23 %
Cumulative percent passing the #16 sieve 14 %
Cumulative percent passing the #30 sieve 10 %
Cumulative percent passing the #50 sieve 7 %
Cumulative percent passing the #100 sieve 5 %
Cumulative percent passing the #200 sieve 3.5 %

Test

DIME Test ID: 2025-11-07-97-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 04/06/2026
Date Tested: 11/18/2025
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 56