Sample Record for 2023-06-13-103
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 993446 DEA: 120J34U4 EFIS: 1218000034
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-55,55-29.6,R6.4/10.3
Work Description: CONSTR BRIDGES, RW, SW, JPCP, HMA PVMT, DRAINAGE AND ELECT SYSTEMS.
Location Description: ORANGE COUNTY IN IRVINE, SANTA ANA, AND TUSTIN ON ROUTE 5 AT NEWPORT AVENUE UNDERCROSSING AND ON ROUTE 55 FROM 0.4 MILE NORTH OF ROUTE 55/405 SEPARATION TO 0.1 MILE SOUTH OF ROUTE 5/55 SEPARATION
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 3075 Townsgate Road, Suite 200, Westlake Village, CA 91361
Resident Engineer: Victor Valdovinos Structure Rep.: Yong Gyun Park
Sample Information
DIME Sample ID: 2023-06-13-103
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Shafter
Sample Organization Contact: (661) 630-7162
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 06/13/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/13/2023
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC - Shafter
Material Information
Source Identification (SMARA, name of Pit or Job Site): Con-Fab California, LLC - Shafter
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Test
DIME Test ID: 2023-06-13-103-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 03/23/2026
Date Tested: 06/13/2023
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
95.7 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
71.7 %
|
|
Cumulative percent passing the #4 sieve
|
50.9 %
|
|
Cumulative percent passing the #8 sieve
|
45 %
|
|
Cumulative percent passing the #16 sieve
|
34.9 %
|
|
Cumulative percent passing the #30 sieve
|
21.1 %
|
|
Cumulative percent passing the #50 sieve
|
8.4 %
|
|
Cumulative percent passing the #100 sieve
|
1.9 %
|
|
Cumulative percent passing the #200 sieve
|
1 %
|
Test
DIME Test ID: 2023-06-13-103-2
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 03/23/2026
Date Tested: 06/13/2023
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Test
DIME Test ID: 2023-06-13-103-3
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 03/23/2026
Date Tested: 06/13/2023
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test: Sand 1.3%, 3/8" rock 1.0%, 1/2" rock 0.7%
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.3 %
|
Test
DIME Test ID: 2023-06-13-103-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 03/23/2026
Date Tested: 06/13/2023
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test: Sand 5.6%, 3/8" rock 2.8%, 1/2" rock 2.2%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
5.6 %
|
