Print Report | Back to Sample Detail

Sample Record for 2026-03-20-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001575 DEA: 061H9604 EFIS: 0625000104 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-46,119-VAR
Work Description: COLD PLANE AC PAVEMENT AND PLACING RHMA TYPE G.
Location Description: KERN COUNTY AT VARIOUS LOCATIONS
Contractor Name: Griffith Company (Edward Torres)
Contractor Address: 1128 Carrier Parkway Avenue, Bakersfield, CA 93308
Resident Engineer: Alejandro Ruezga Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-03-20-4
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/20/2026
Date that the sample was received by the laboratory/organization performing the testing: 03/20/2026
The quantity of what the sample constitutes: L3SL7 - 14 box RHMA, 2bags of cold feed,
A brief description of the sample: 1/2" RHMA-G
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith Edmonston

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 3
Sublot number: 7
HMA Mix Number:
Binder content (%): 7.5
Virgin binder PG: PG 64-16
Design binder PG: PG 64-16
Binder Supplier: San Juaquin Refinery
RAP content (%): 0
WMA Additives: No
Antistrip type: LIme 0.8%
Test results on following page(s): 1

Test Results

Test

DIME Test ID: 2026-03-20-4-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/20/2026
Date Tested: 03/20/2026
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3974.8 g
Mass of the specimen and specimen basket assembly prior to ignition 5666.1 g
Corrected Asphalt Binder Content 7.21 %
Mass of HMA Sample prior to ignition 1691.3 g
Mass Loss 126.4 g
Mass of aggregate remaining after ignition 1564.9 g
Correction Factor (Percent by mass of HMA Specimen) 0.26 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F