Print Report | Back to Sample Detail

Sample Record for 2026-03-16-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993812 DEA: 11431274 EFIS: 1121000129 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-5-R0.3/R36.0
Work Description: CMGC Project- Restore the pavement to a state of good repair through roadway rehabilitation, pavement preservation, drainage restoration, transportation management system upgrades, and American with Disabilities Act (ADA) infrastructure improvements.
Location Description: SD County
Contractor Name: Kiewit Infrastrucure
Contractor Address: West 2200 Columbia House Boulevard, Vancouver, WA 98661
Resident Engineer: Timothy Poppe Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-03-16-4
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/16/2026
Date that the sample was received by the laboratory/organization performing the testing: 03/16/2026
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: Daily Production
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta Lakeside

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 21218180AH
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier: Valero
RAP content (%): 0
WMA Additives: No
Antistrip type:
Test results on following page(s): 3

Test Results

Test

DIME Test ID: 2026-03-16-4-1
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 03/27/2026
Date Tested: 03/27/2026
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies
Test Result Compliance: complies
Additional Comments When Verified:
Number of Cores 3
Core 1 ID 2 A 7
Dry Weight 1 688.4 grams
Parrafin Coated Weight 1 699.4 grams
Coated Weight in Water 1 386.6 grams
Theoretical Maximum Density 2.456
Core 2 ID 2 B 7
Dry Weight 2 750.3 grams
Parrafin Coated Weight 2 762.8 grams
Coated Weight in Water 2 421.5 grams
Core 3 ID 2 C 7
Dry Weight 3 869.3 grams
Parrafin Coated Weight 3 882.9 grams
Coated Weight in Water 3 486.6 grams
Sublot Relative Compaction 93.1 %

Test

DIME Test ID: 2026-03-16-4-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/27/2026
Date Tested: 03/20/2026
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies target 7.5 tested 7.65
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3961.5 g
Mass of the specimen and specimen basket assembly prior to ignition 5510.9 g
Mass of HMA Sample prior to ignition 1549.4 g
Corrected Asphalt Binder Content 7.59 %
Mass Loss 118 g
Mass of aggregate remaining after ignition 1431.4 g
Correction Factor (Percent by mass of HMA Specimen) 0.03 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C

Test

DIME Test ID: 2026-03-16-4-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 03/27/2026
Date Tested: 03/20/2026
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: not applicable
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7475.6 grams
Mass of oven-dry sample in air for Sample 1 1542.6 grams
Mass of container filled with the sample and water for Sample 1 8390.1 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.456
Theoretical maximum density at 25°C (77°F) 2448.9 kg/m^3