Print Report | Back to Sample Detail

Sample Record for 2026-03-02-30

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-03-02-30
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (213) 505-4213
Type of Sample: Stock
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 03/02/2026
Date that the sample was received by the laboratory/organization performing the testing: 03/05/2026
The quantity of what the sample constitutes: 500'
A brief description of the sample: Type B Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman Acme Corp

Material Information

Mfg. Lot Number(s): 4526148
Manufacturer(s): Watson Bowman Acme Corp
Temperature: 72
Humidity: 50
Comments:
Joint Seal Size: 2.75"
Test results on following page(s): 1

Test Results

Test

DIME Test ID: 2026-03-02-30-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Verified Date: 06/10/2026
Date Tested: 06/10/2026
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM NA
Temperature 0 f
Humidity 0 %
Spec Minimum Uncompressed Width 2.805 in
Area (5 Times of the Height of Contact Face) no data0 sqin
Half of the Spec Minimum Uncompressed Width no data0 in
85 Percent of the Spec Minimum Uncompressed Width no data0 in
3 Times of the Area no data0 sqin
4 Times of the Load at W1 no data0 lbs
W1 (US Units) 2.384 in
W1 (Metric Units) 60.554 millimeters
W2 (US Units) 1.192 in
W2 (Metric Units) 30.227 millimeters
Satisfactory of MR of (US Units) 1.192 in
Satisfactory of MR of (Metric Units) 30.28 millimeters
Optional W1 Measurement 1 no data0 in
Optional W1 Measurement 2 no data0 sqin