Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2017-12-08-2
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Sample Organization Contact: (916) 227-7912
Type of Sample: Stock
Type of Material: Thermoplastic
Sample Taken Date: 12/08/2017
Date that the sample was received by the laboratory/organization performing the testing: 12/08/2017
The quantity of what the sample constitutes: 44000 lbs
A brief description of the sample: na
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: ennis flint
DIME Test ID: 2017-12-08-2-3
Test Method: CTM 423-December 2013: Method for Testing Thermoplastic Traffic Line Material (Glass Bead Content)
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
Data has not been verified.
DIME Test ID: 2017-12-08-2-4
Test Method: CTM 423-December 2013: Method for Testing Thermoplastic Traffic Line Material (Viscosity)
Verified Date: 01/17/2018
Date Tested: 01/17/2018
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2017-12-08-2-6
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 01/17/2018
Date Tested: 01/10/2018
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified: test
|
ASTM Thermometer used?
|
C
|
|
Softening Point Sample 1
|
no data
|
|
Softening Point Sample 2
|
215 C
|
|
Bath Liquid
|
freshly boiled distilled water
|
|
Minutes Reaction
|
no data
|
DIME Test ID: 2017-12-08-2-7
Test Method: CTM 423-December 2013: Method for Testing Thermoplastic Traffic Line Material (Inert Filler)
Verified Date: 01/19/2018
Date Tested: 01/18/2018
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
