Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000665 DEA: 081K4004 EFIS: 0819000031
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-15-3.5/6.8
Work Description: HMA (TYPE A), RDWY EXC, STR CONC RET WALL, RUBBERIZED HMA (OGFC).
Location Description: TEMECULA FROM 0.1 MI NORTH OF TEMECULA PARKWAY TO 0.2 MI NORTH OF WINCHESTER ROAD
Contractor Name: BEADOR CONSTRUCTION COMPANY, INC.
Contractor Address: 2900 Bristol Street, Suite D204, Costa Mesa, CA 92626
Resident Engineer: Denise Sostrom Structure Rep.: Gizachew Abayneh
DIME Sample ID: 2026-01-26-36
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 01/26/2026
Date that the sample was received by the laboratory/organization performing the testing: 01/27/2026
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: HMA Type A
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: RJ Noble Company
HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 36R2508SPWEC
Binder content (%): 4.7
Virgin binder PG:
Design binder PG: PG 70-10
Binder Supplier: World Oil
RAP content (%): 25
WMA Additives: Yes
Antistrip type: Evotherm
DIME Test ID: 2026-01-26-36-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/13/2026
Date Tested: 01/30/2026
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Corrected Asphalt Binder Content
|
4.78 %
|
|
Mass of HMA Sample prior to ignition
|
2176 g
|
|
Mass Loss
|
118.7 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.61 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.06 %
|
|
Test Temperature
|
538 C
|