Print Report | Back to Sample Detail

Sample Record for 2026-01-30-12

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000199 DEA: 050N7054 EFIS: 0518000111 QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-10.4/11.1
Work Description: South Coast 101 HOV Lanes Project 4E South- Santa Barbara
Location Description:
Contractor Name: Granite Construction Company
Contractor Address: PO Box 6744, Santa Barbara, CA 93160
Resident Engineer: Luobao Cai Structure Rep.: Faris Malik

Sample Information

DIME Sample ID: 2026-01-30-12
TL Number from the TL Form: 4ES0119
Sample Submitted By Organization: CT D05 - Carpinteria Field Laboratory
Sample Organization Contact: (805) 621-3616
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 01/30/2026
Date that the sample was received by the laboratory/organization performing the testing: 02/02/2026
The quantity of what the sample constitutes: 750-1500 Tons
A brief description of the sample: 3/4 HMA SP R25
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Santa Paula

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 19
HMA Mix Number: 14342
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2026-01-30-12-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 02/20/2026
Date Tested: 02/06/2026
Submitted By Organization: CT D05 - San Luis Obispo District Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: daniel.gingras@dot.ca.gov
Organization Phone: (805) 549-3141
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3894 g
Mass of the specimen and specimen basket assembly prior to ignition 5989.2 g
Corrected Asphalt Binder Content 4.79 %
Mass of HMA Sample prior to ignition 2095.2 g
Mass Loss 115.3 g
Mass of aggregate remaining after ignition 1979.9 g
Correction Factor (Percent by mass of HMA Specimen) 0.71 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F