Print Report | Back to Sample Detail

Sample Record for 2026-01-15-38

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000540 DEA: 051Q03U4 EFIS: 0524000192 QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO,KER-46-60.3/60.8,0.0/0.4
Work Description: VERTICAL CURVE AND EXTEND EXISTING TRUCK CLIMBING LANE.
Location Description: SAN LUIS OBISPO AND KERN COUNTIES NEAR CHOLAME FROM 2.0 MILES EAST OF ANTELOPE ROAD TO 0.4 MILE EAST OF THE KERN COUNTY LINE.
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: Unknown
Resident Engineer: Andrew Borelli Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2026-01-15-38
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Whitley Gardens Field Laboratory
Sample Organization Contact: 805-540-9933
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 01/15/2026
Date that the sample was received by the laboratory/organization performing the testing: 01/16/2026
The quantity of what the sample constitutes: 594 Tons
A brief description of the sample: 3x HMA cores
From where was the sample collected: Job Site
Laboratory sample identification: 260115-L2SL14
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Papich Construction

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 2
Sublot number: 14
HMA Mix Number: 39AC34LMA
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2026-01-15-38-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 01/21/2026
Date Tested: 01/16/2026
Submitted By Organization: CT D05 - Whitley Gardens Field Laboratory
Organization Address: 102 South Whitley Gardens Drive,
Organization City: Paso Robles
Organization State: CA
Organization Zipcode: 93346
Organization Email: kyle.engen@dot.ca.gov
Organization Phone: (805) 540-9933
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Water
Method Performed Mechanical Agitation - Method A
Mass of oven-dry sample in air for Sample 1 2585.2 grams
Mass of sample in water for Sample 1 1520.8 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.429
Theoretical maximum density at 25°C (77°F) 151.2 lb/ft^3

Test 2 of 4

DIME Test ID: 2026-01-15-38-2
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 01/21/2026
Date Tested: 01/20/2026
Submitted By Organization: CT D05 - Whitley Gardens Field Laboratory
Organization Address: 102 South Whitley Gardens Drive,
Organization City: Paso Robles
Organization State: CA
Organization Zipcode: 93346
Organization Email: kyle.engen@dot.ca.gov
Organization Phone: (805) 540-9933
General Comments for this Test: 14A Performed under T275
Test Result Compliance: does not comply
Additional Comments When Verified:
Number of Cores 1
Core 1 ID 14A
Dry Weight 1 1546.6 grams
Parrafin Coated Weight 1 1576.3 grams
Coated Weight in Water 1 887.7 grams
Theoretical Maximum Density 2.429

Test 3 of 4

DIME Test ID: 2026-01-15-38-3
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 01/21/2026
Date Tested: 01/20/2026
Submitted By Organization: CT D05 - Whitley Gardens Field Laboratory
Organization Address: 102 South Whitley Gardens Drive,
Organization City: Paso Robles
Organization State: CA
Organization Zipcode: 93346
Organization Email: kyle.engen@dot.ca.gov
Organization Phone: (805) 540-9933
General Comments for this Test: 14B Performed under T275
Test Result Compliance: does not comply
Additional Comments When Verified:
Number of Cores 1
Core 1 ID 14B
Dry Weight 1 1506.4 grams
Parrafin Coated Weight 1 1535.7 grams
Coated Weight in Water 1 870.1 grams
Theoretical Maximum Density 2.429

Test 4 of 4

DIME Test ID: 2026-01-15-38-4
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 01/21/2026
Date Tested: 01/20/2026
Submitted By Organization: CT D05 - Whitley Gardens Field Laboratory
Organization Address: 102 South Whitley Gardens Drive,
Organization City: Paso Robles
Organization State: CA
Organization Zipcode: 93346
Organization Email: kyle.engen@dot.ca.gov
Organization Phone: (805) 540-9933
General Comments for this Test: 14C Performed under T275
Test Result Compliance: complies
Additional Comments When Verified:
Number of Cores 1
Core 1 ID 14C
Dry Weight 1 797.8 grams
Parrafin Coated Weight 1 817.3 grams
Coated Weight in Water 1 446.3 grams
Theoretical Maximum Density 2.429