Sample Record for 2026-01-20-4
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 1000785 DEA: 081J3204 EFIS: 0818000017 COOP: NONE
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-17.8
Work Description: BUILDING WORK, WROUGHT IRON FENCE, HOT MIX ASPHALT, & AGGREGATE BASE.
Location Description: RIVERSIDE COUNTY NEAR LAKE ELSINORE AT LAKE ELSINORE MAINTENANCE STATION AT 18745 CONARD AVENUE
Contractor Name: NATIONWIDE CONTRACTING SERVICES, INC. DBA NATIONWIDE GENERAL CONSTRUCTION SERVICES
Contractor Address: 7660 liberty drive, Huntington beach, CA, 92647
Resident Engineer: Jason Shbaita Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2026-01-20-4
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 01/20/2026
Date that the sample was received by the laboratory/organization performing the testing: 01/22/2026
The quantity of what the sample constitutes: 85 anchor bolt assemblies, 2 samples
A brief description of the sample: 5/8"x 16", ASTM F1554 Anchor Bolts
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AB Threading
Material Information
Rocap Number(s):
Heat Number(s): Bolt 1000221652, Nut 1000130058, washer12511080
Nut Mfg. Lot Number(s): W000278671
Washer Mfg. Lot Number(s): 0725-729
Bolt Specification: ASTM F1554
Bolt Length(s): 16"
Nut Specification: ASTM A563
Washer Specification: ASTM F436
Finish: ASTM 153
Diameter/Size: 5/8"
Bolt Mfg. Lot Number: 4101021165240
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
Test Results
Test 1 of 13
DIME Test ID: 2026-01-20-4-1
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 02/05/2026
Date Tested: 01/23/2026
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
1000221652
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
BLUE
|
|
Size
|
0.625 in
|
|
Bolt Length
|
16 in
|
|
Pitch Diameter
|
0.573 in
|
|
Pitch Diameter 2nd
|
0.573 in
|
Test 2 of 13
DIME Test ID: 2026-01-20-4-2
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 02/05/2026
Date Tested: 01/23/2026
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
1000221652
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
BLUE
|
|
Size
|
0.625 in
|
|
Bolt Length
|
16 in
|
|
Pitch Diameter
|
0.571 in
|
|
Pitch Diameter 2nd
|
0.571 in
|
Test 3 of 13
DIME Test ID: 2026-01-20-4-3
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
1000221652
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
no data in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
8 mils
|
Test 4 of 13
DIME Test ID: 2026-01-20-4-4
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
1000221652
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
no data in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
7.1 mils
|
Test 5 of 13
DIME Test ID: 2026-01-20-4-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000278671
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
0.625 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.4 mils
|
Test 6 of 13
DIME Test ID: 2026-01-20-4-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000278671
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
0.625 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
5.5 mils
|
Test 7 of 13
DIME Test ID: 2026-01-20-4-7
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000278671
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
0.625 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.2 mils
|
Test 8 of 13
DIME Test ID: 2026-01-20-4-8
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
0725-729
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
0.625 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.1 mils
|
Test 9 of 13
DIME Test ID: 2026-01-20-4-9
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
0725-729
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
0.625 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.1 mils
|
Test 10 of 13
DIME Test ID: 2026-01-20-4-10
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
0725-729
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
0.625 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
41
|
|
Spacing
|
Ok
|
Test 11 of 13
DIME Test ID: 2026-01-20-4-11
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
0725-729
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
0.625 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
40
|
|
Spacing
|
Ok
|
Test 12 of 13
DIME Test ID: 2026-01-20-4-12
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Bolt Samples
|
2
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | 1000221652 | 0.625 | 16090 | 0 | 0 | Yield 12,060 | Kleinfelder | | 1B | 1000221652 | 0.625 | 16530 | 0 | 0 | Yield 12,280 | Kleinfelder |
| |
|
UTM
|
NA
|
|
Temperature
|
0 f
|
Test 13 of 13
DIME Test ID: 2026-01-20-4-14
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 02/05/2026
Date Tested: 02/02/2026
Submitted By Organization: Kleinfelder - Rancho Cordova
Organization Address: 3130 Kilgore Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95670
Organization Email: mmlee@kleinfelder.com
Organization Phone: (916) 308-3701
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Bolt Samples
|
3
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | W000278671 | 0.625 | 33900 | 0 | 0 | Nuts | Kleinfelder | | 1B | W000278671 | 0.625 | 33900 | 0 | 0 | Nuts | Kleinfelder | | 1C | W000278671 | 0.625 | 33900 | 0 | 0 | Nuts | Kleinfelder |
| |
|
UTM
|
NA
|
|
Temperature
|
0 f
|
