Print Report | Back to Sample Detail

Sample Record for 2025-09-11-100

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995262 DEA: 041Q4604 EFIS: 0418000279 QA Service Level: 1
DIST-CO-RTE-PM: 04-SCL-280-0/2.7
Work Description: RHMA-G SURFACING AND CONSTRUCT BRIDGE APPROACH.
Location Description: SANTA CLARA COUNTY IN SAN JOSE FROM ROUTE 280/680/101 SEPARATION TO 0.2 MILE WEST OF BIRD AVENUE OVERCROSSING
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: 1520 4th Street, Berkeley, CA 94710
Resident Engineer: Nim Patel Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-09-11-100
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - San Jose Construction Field Laboratory
Sample Organization Contact: (510) 385-8171
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/11/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/18/2025
The quantity of what the sample constitutes: 0-750 Tons
A brief description of the sample: 3/4"RHMA-G
From where was the sample collected: Source
Laboratory sample identification: SJ-091125-T308-L1SL18
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta Sunol Drier Drum Plant

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 18
HMA Mix Number: 63S4BV 25W1C 8967
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2025-09-11-100-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/28/2025
Date Tested: 09/12/2025
Submitted By Organization: CT D04 - San Jose Construction Field Laboratory
Organization Address: 1007 Knox Avenue,
Organization City: San Jose
Organization State: CA
Organization Zipcode: 95122
Organization Email: fernando.vega@dot.ca.gov
Organization Phone: (510) 385-8171
General Comments for this Test: Lot 1 – Sublot 18 10K Milestone 1 of 2.
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2120.7 g
Corrected Asphalt Binder Content 7.98 %
Mass Loss 185.7 g
Correction Factor (Percent by mass of HMA Specimen) 0.62 %
Moisture Content no data0 %
Temperature Compensation Factor 0.16 %
Test Temperature 538 C

Test 2 of 2

DIME Test ID: 2025-09-11-100-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/28/2025
Date Tested: 09/15/2025
Submitted By Organization: CT D04 - San Jose Construction Field Laboratory
Organization Address: 1007 Knox Avenue,
Organization City: San Jose
Organization State: CA
Organization Zipcode: 95122
Organization Email: fernando.vega@dot.ca.gov
Organization Phone: (510) 385-8171
General Comments for this Test: Lot 1 – Sublot 18 10K Milestone 2 of 2.
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2110.5 g
Corrected Asphalt Binder Content 8 %
Mass Loss 185.5 g
Correction Factor (Percent by mass of HMA Specimen) 0.62 %
Moisture Content no data0 %
Temperature Compensation Factor 0.17 %
Test Temperature 538 C