Print Report | Back to Sample Detail

Sample Record for 2025-11-26-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000510 DEA: 060W79U4 EFIS: 0622000189 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER,TUL-99-56.4/57.6,0.0/13.5
Work Description: RDWY EXC, HMA, AGGREGATE BASE, CRCP, SIGN STR, AND STR EXC.
Location Description: KERN AND TULARE COUNTIES IN AND NEAR DELANO FROM 0.2 MILE SOUTH OF CECIL AVENUE OVERCROSSING TO 0.7 MILE NORTH OF AVENUE 100 OVERCROSSING
Contractor Name: Security Paving Company, Inc.
Contractor Address: 2915 Fairhaven Drive, Bakersfield, CA 93308
Resident Engineer: Jake Garcia Structure Rep.: Raman Guraya

Sample Information

DIME Sample ID: 2025-11-26-23
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Shafter
Sample Organization Contact: (661) 630-7162
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 11/26/2025
Date that the sample was received by the laboratory/organization performing the testing: 11/26/2025
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC - Shafter

Material Information

Source Identification (SMARA, name of Pit or Job Site): Con-Fab California, LLC - Shafter
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2025-11-26-23-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 12/17/2025
Date Tested: 12/04/2025
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? Combined Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 91.8 %
Cumulative percent passing the 3/8 in. sieve 70.2 %
Cumulative percent passing the #4 sieve 48.7 %
Cumulative percent passing the #8 sieve 40.8 %
Cumulative percent passing the #16 sieve 31.3 %
Cumulative percent passing the #30 sieve 18.3 %
Cumulative percent passing the #50 sieve 7.5 %
Cumulative percent passing the #100 sieve 1.4 %
Cumulative percent passing the #200 sieve 0.3 %

Test 2 of 4

DIME Test ID: 2025-11-26-23-2
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 12/17/2025
Date Tested: 12/04/2025
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sand Equivalent 76

Test 3 of 4

DIME Test ID: 2025-11-26-23-3
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 12/17/2025
Date Tested: 12/04/2025
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test: Sand 1.3%, 1/2" Rock 1.0%, 3/8" Rock 0.9%
Test Result Compliance:
Additional Comments When Verified:
Percent finer than No. 200 sieve 1.3 %

Test 4 of 4

DIME Test ID: 2025-11-26-23-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 12/17/2025
Date Tested: 11/26/2025
Submitted By Organization: Con-Fab California Corporation - Shafter
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: benjamina@confabca.com
Organization Phone: (661) 630-3283
General Comments for this Test: Sand 6.85%, 1/2" Rock 1.75%, 3/8" Rock 3.32%
Test Result Compliance:
Additional Comments When Verified:
Total evaporable moisture content 6.9 %