Print Report | Back to Sample Detail

Sample Record for 2025-10-02-59

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994781 DEA: 07322704 EFIS: 0716000067 QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-1-1.3/26.6
Work Description: CONSTRUCT PERVIOUS CONCRETE PAVEMENT
Location Description: VENTURA COUNTY AT VARIOUS LOCATIONS
Contractor Name: AUTOBAHN CONSTRUCTION
Contractor Address: 933 North Batavia Street, Orange, CA 92867
Resident Engineer: Ranjit Singh Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-10-02-59
TL Number from the TL Form: 004434
Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Sample Organization Contact: (213) 817-0387
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 10/02/2025
Date that the sample was received by the laboratory/organization performing the testing: 10/09/2025
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/8 HMA-DIKE
From where was the sample collected: Manufacturer
Laboratory sample identification: 25-1132
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials Saticoy

Material Information

HMA Type: Type A HMA
HMA Grading: 3/8 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2025-10-02-59-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/15/2025
Date Tested: 10/10/2025
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 407-6963
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 4114.6 g
Mass of the specimen and specimen basket assembly prior to ignition 5693.7 g
Corrected Asphalt Binder Content 6.41 %
Mass of HMA Sample prior to ignition 1579.1 g
Mass Loss 101.2 g
Mass of aggregate remaining after ignition 1477.9 g
Correction Factor (Percent by mass of HMA Specimen) no data0 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C