Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000927 DEA: 101R7204 EFIS: 1023000209
QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ-5,99-Var
Work Description: PLACE POLYESTER CONCRETE OVERLAY, TRAFFIC STRIPE, COLD PLANE, AND HMA.
Location Description: SAN JOAQUIN COUNTY AT VARIOUS LOCATIONS
Contractor Name: MCCUEN CONSTRUCTION, INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2025-11-04-43
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Assurance
Type of Material: Asphalt Binder
Sample Taken Date: 11/04/2025
Date that the sample was received by the laboratory/organization performing the testing: 11/14/2025
The quantity of what the sample constitutes: 1 Can
A brief description of the sample: 3/4 WMA w/25%Rap
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Vernalis
Performance Grade: PG 64-16
Modified:
Lot number: 1
Sublot number: 2
Tank number:
Time of sample:
HMA Supplier: Teichert Vernalis
Certified Asphalt Supplier: Pacific Northwest Oil - Stockton CA
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2025-11-04-43-1
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 11/19/2025
Date Tested: 11/19/2025
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Original
Test Result Compliance: complies
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Test Gap
|
1 mm
|
|
Test Frequency
|
10.0 rad/s
|
|
Strain Amplitude
|
12.06 %
|
|
Stress Amplitude
|
0.165 kPa
|
|
Phase Angle (δ) (for the 10 cycles)
|
87.5 degree
|
|
Complex Modulus (G*) (for the 10 measurements)
|
1.372 kPa
|
|
Test Temperature (Specimen 1)
|
64.0 C
|
|
Dynamic Shear, G*/sin(δ)
|
1.37 kPa
|
