Print Report | Back to Sample Detail

Sample Record for 2025-11-06-38

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-11-06-38
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Stock
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 11/06/2025
Date that the sample was received by the laboratory/organization performing the testing: 11/13/2025
The quantity of what the sample constitutes: 550
A brief description of the sample: 3.75" Elastomeric Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman Acme Corp

Material Information

Mfg. Lot Number(s): 2625400
Manufacturer(s): Watson Bowman Acme Corp
Temperature: 72
Humidity: 50
Comments:
Joint Seal Size: 3.75
Test results on following page(s): 7

Test Results

Test 1 of 7

DIME Test ID: 2025-11-06-38-1
Test Method: ASTM D2240-15r21: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 12/04/2025
Date Tested: 12/03/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 0 f
Humidity 0 %
Reading #1 56
Reading #2 56
Reading #3 55
Reading #4 57
Reading #5 58
Mean 56.5

Test 2 of 7

DIME Test ID: 2025-11-06-38-2
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 12/04/2025
Date Tested: 12/03/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values psi
UTM NA
Humidity 0 %
Temperature 0 f
Sample 1 Median Thickness 0.109 in
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2378 psi
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.103 in
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2007 psi
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.098 in
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2237 psi
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2237 psi

Test 3 of 7

DIME Test ID: 2025-11-06-38-3
Test Method: ASTM D2628-91r16: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Verified Date: 12/04/2025
Date Tested: 12/03/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
High or low tempurature Low
Temperature 0 f
Humidity 0 %
Temp Recovery (22 hrs at -20F) Size Before (Height of Contact Face ) 3.75 in
Temp Recovery (22 hrs at -20F) Size After (Recovered Contact Face ) 3.131 in
Percent Recovery 83 %

Test 4 of 7

DIME Test ID: 2025-11-06-38-4
Test Method: ASTM D2628-91r16: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Verified Date: 12/04/2025
Date Tested: 12/03/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test: hot
Test Result Compliance: complies
Additional Comments When Verified:
High or low tempurature High
Temperature 0 f
Humidity 0 %
Temp Recovery (22 hrs at -20F) Size Before (Height of Contact Face ) 3.75 in
Temp Recovery (22 hrs at -20F) Size After (Recovered Contact Face ) 3.591 in
Percent Recovery 96 %

Test 5 of 7

DIME Test ID: 2025-11-06-38-5
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Verified Date: 12/04/2025
Date Tested: 12/03/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM NA
Temperature 0 f
Humidity 0 %
Spec Minimum Uncompressed Width 3.763 in
Area (5 Times of the Height of Contact Face) 18 sqin
Half of the Spec Minimum Uncompressed Width no data0 in
85 Percent of the Spec Minimum Uncompressed Width 3.199 in
3 Times of the Area no data0 sqin
4 Times of the Load at W1 no data0 lbs
W1 (US Units) 3.584 in
W1 (Metric Units) 91.0336 millimeters
W2 (US Units) 1.474 in
W2 (Metric Units) 37.4396 millimeters
Satisfactory of MR of (US Units) 1.725 in
Satisfactory of MR of (Metric Units) 43.815 millimeters
Optional W1 Measurement 1 no data0 in
Optional W1 Measurement 2 no data0 sqin

Test 6 of 7

DIME Test ID: 2025-11-06-38-6
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 12/04/2025
Date Tested: 12/03/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass

Test 7 of 7

DIME Test ID: 2025-11-06-38-7
Test Method: ASTM D471-16r21: Standard Test Method for Rubber Property - Effect of Liquids
Verified Date: 12/04/2025
Date Tested: 12/03/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Oil Swell Percentage 33.6 %