Print Report | Back to Sample Detail

Sample Record for 2025-09-16-103

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000540 DEA: 051Q03U4 EFIS: 0524000192 QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO,KER-46-60.3/60.8,0.0/0.4
Work Description: VERTICAL CURVE AND EXTEND EXISTING TRUCK CLIMBING LANE.
Location Description: SAN LUIS OBISPO AND KERN COUNTIES NEAR CHOLAME FROM 2.0 MILES EAST OF ANTELOPE ROAD TO 0.4 MILE EAST OF THE KERN COUNTY LINE.
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: Unknown
Resident Engineer: Andrew Borelli Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-09-16-103
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Dispute Resolution
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/16/2025
Date that the sample was received by the laboratory/organization performing the testing: 11/03/2025
The quantity of what the sample constitutes: 6 boxes
A brief description of the sample: PSU
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sierra Pacific - Avenal

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 2
HMA Mix Number: 39AC12GGLMA
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%): 0
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2025-09-16-103-1
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Verified Date: 11/18/2025
Date Tested: 11/17/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies Target 12.7 mm Tested an Avg of 10.59 mm
Test Result Compliance: complies
Additional Comments When Verified:
Specimen Preparation Method PMLC
Test Temperature 122 F
Air Void Content for specimen A-1 6.5 %
Air Void Content for specimen A-2 6.5 %
Air Void Content for specimen B-1 6.7 %
Air Void Content for specimen B-2 6.7 %
Stripping Inflection Point (Wheel A) >15000
Stripping Inflection Point (Wheel B) >15000
Maximum impression at 5000 passes (left wheel) 2.2 mm
Maximum impression at 5000 passes (right wheel) 2.24 mm
Average impression at 5000 passes (left/right avg) 2.22 mm
Maximum impression at 10000 passes (left wheel) 6.01 mm
Maximum impression at 10000 passes (right wheel) 4.46 mm
Average impression at 10000 passes (left/right avg) 5.23 mm
Maximum impression at 15000 passes (left wheel) 12.31 mm
Maximum impression at 15000 passes (right wheel) 8.86 mm
Average impression at 15000 passes (left/right avg) 10.59 mm
Average impression at 20000 passes (left/right avg) no data
Average impression at 25000 passes (left/right avg) no data