Print Report | Back to Sample Detail

Sample Record for 2025-11-05-34

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000510 DEA: 060W79U4 EFIS: 0622000189 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER,TUL-99-56.4/57.6,0.0/13.5
Work Description: RDWY EXC, HMA, AGGREGATE BASE, CRCP, SIGN STR, AND STR EXC.
Location Description: KERN AND TULARE COUNTIES IN AND NEAR DELANO FROM 0.2 MILE SOUTH OF CECIL AVENUE OVERCROSSING TO 0.7 MILE NORTH OF AVENUE 100 OVERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 2915 Fairhaven Drive, Bakersfield, CA 93308
Resident Engineer: Jake Garcia Structure Rep.: Raman Guraya

Sample Information

DIME Sample ID: 2025-11-05-34
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 11/05/2025
Date that the sample was received by the laboratory/organization performing the testing: 11/06/2025
The quantity of what the sample constitutes: L1SL135
A brief description of the sample: 3/4" HMA(type A) with 25% Rap
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Deer Creek Porterville

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 135
HMA Mix Number: 25J012
Binder content (%): 4.2
Virgin binder PG: PG 64-16
Design binder PG: PG 70-10
Binder Supplier: San Juaquin Refinery
RAP content (%): 25
WMA Additives: No
Antistrip type: Lime
Test results on following page(s): 3

Test Results

Test 1 of 3

DIME Test ID: 2025-11-05-34-1
Test Method: AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 11/06/2025
Date Tested: 11/06/2025
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7328.1 grams
Mass of oven-dry sample in air for Sample 1 2574.2 grams
Mass of container filled with the sample and water for Sample 1 8950.2 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.704
Theoretical maximum density at 25°C (77°F) 2696 kg/m^3

Test 2 of 3

DIME Test ID: 2025-11-05-34-2
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 11/06/2025
Date Tested: 11/06/2025
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3972.6 g
Mass of the specimen and specimen basket assembly prior to ignition 5983.3 g
Corrected Asphalt Binder Content 4.58 %
Mass of HMA Sample prior to ignition 2010.7 g
Mass Loss 99.4 g
Mass of aggregate remaining after ignition 1911.3 g
Correction Factor (Percent by mass of HMA Specimen) 0.36 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F

Test 3 of 3

DIME Test ID: 2025-11-05-34-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 11/07/2025
Date Tested: 11/06/2025
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.502
Bulk Specific Gravity 2 2.52
Bulk Specific Gravity 3 2.565
Average Bulk Specific Gravity 2.529