Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000540 DEA: 051Q03U4 EFIS: 0524000192
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO,KER-46-60.3/60.8,0.0/0.4
Work Description: VERTICAL CURVE AND EXTEND EXISTING TRUCK CLIMBING LANE.
Location Description: SAN LUIS OBISPO AND KERN COUNTIES NEAR CHOLAME FROM 2.0 MILES EAST OF ANTELOPE ROAD TO 0.4 MILE EAST OF THE KERN COUNTY LINE.
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: Unknown
Resident Engineer: Andrew Borelli Structure Rep.: Unknown
DIME Sample ID: 2025-08-22-77
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Dispute Resolution
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/22/2025
Date that the sample was received by the laboratory/organization performing the testing: 10/14/2025
The quantity of what the sample constitutes: 3 boxes
A brief description of the sample: Dispute HMA
From where was the sample collected: Supplier
Laboratory sample identification: 25-08-21-89-A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sierra Pacific - Avenal
HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 2
Sublot number: 9
HMA Mix Number: 39AC34LMA
Binder content (%): 0.0
Virgin binder PG: PG 64-16
Design binder PG: PG 64-16
Binder Supplier: SJR
RAP content (%): 0
WMA Additives: Yes
Antistrip type: Dry Lime
DIME Test ID: 2025-08-22-77-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/10/2025
Date Tested: 12/04/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Does Not Comply Target 5.00 % tested 6.00 %
Test Result Compliance: does not comply
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
4035.4 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
6097.9 g
|
|
Mass of HMA Sample prior to ignition
|
2062.5 g
|
|
Corrected Asphalt Binder Content
|
6 %
|
|
Mass Loss
|
143.9 g
|
|
Mass of aggregate remaining after ignition
|
1918.6 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.98 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
no data0 %
|
|
Test Temperature
|
538 C
|
