Sample Record for 2025-08-12-114
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 995254 DEA: 040P9204 EFIS: 0418000026
QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-680-6.4/6.6
Work Description: HMA AND RHMA SURFACING, DECK REPAIR, POLYESTER OVERLAY AND JOIN SEALS
Location Description: ALAMEDA COUNTY IN FREMONT FROM 0.1 MILE SOUTH OF MISSION SAN JOSE 680/238 SEPARATION TO 0.3 MILE NORTH OF MISSION SAN JOSE 680/238 SEPARATION
Contractor Name: MYERS & SONS CONSTRUCTION, LLC.
Contractor Address: 45 Morrison Avenue, Sacramento, CA 95838
Resident Engineer: Scott Sowko Structure Rep.: Jordan Jarosz
Sample Information
DIME Sample ID: 2025-08-12-114
TL Number from the TL Form: PL081225
Sample Submitted By Organization: CT D04 - Hayward DME / District Laboratory
Sample Organization Contact: (510) 507-3456
Type of Sample: Production Start-Up
Type of Material: Aggregate
Sample Taken Date: 08/12/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/22/2025
The quantity of what the sample constitutes: 4 Bags Combined Agg
A brief description of the sample: 1/2"RHMA-O (OGFC)
From where was the sample collected: Source
Laboratory sample identification: D04-SE-25-052
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Pleasanton
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-01-0010
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Plant Sampler
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number: 326114W
Test Results
Test 1 of 3
DIME Test ID: 2025-08-12-114-1
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.
Test 2 of 3
DIME Test ID: 2025-08-12-114-2
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.
Test 3 of 3
DIME Test ID: 2025-08-12-114-3
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.
