Sample Record for 2025-07-07-87
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 1000538 DEA: 042Q6104 EFIS: 0419000030
QA Service Level: 1
DIST-CO-RTE-PM: 04-NAP-29-R7.3/13.5
Work Description: COLD PLANE, RHMA OVERLAY, INSTALL MGS, CURB RAMP, AND RUMBLE STRIP.
Location Description: NAPA COUNTY IN AND NEAR NAPA FROM 0.2 MILE NORTH OF NAPA RIVER BRIDGE OVERHEAD TO 0.1 MILE SOUTH OF SIERRA AVENUE.
Contractor Name: GRANITE ROCK COMPANY
Contractor Address: 2280 Bates Avenue, Suite 200, Concord, CA 94520
Resident Engineer: Paramdeep Brar Structure Rep.: Nana Budu
Sample Information
DIME Sample ID: 2025-07-07-87
TL Number from the TL Form: CON-070725-1
Sample Submitted By Organization: CT D04 - Hayward DME / District Laboratory
Sample Organization Contact: (510) 507-3456
Type of Sample: Production Start-Up
Type of Material: Aggregate
Sample Taken Date: 07/07/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/22/2025
The quantity of what the sample constitutes: 2 Bags per bin#1-2
A brief description of the sample: 3/8"HMA-SP-R25
From where was the sample collected: Manufacturer
Laboratory sample identification: D04-SE-25-041
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Napa
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-49-0004
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: At the plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number: 1
Sublot number: 1
Aggregate Mix Number: 420300W
Test Results
Test 1 of 4
DIME Test ID: 2025-07-07-87-1
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.
Test 2 of 4
DIME Test ID: 2025-07-07-87-2
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.
Test 3 of 4
DIME Test ID: 2025-07-07-87-3
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.
Test 4 of 4
DIME Test ID: 2025-07-07-87-4
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.
