Print Report | Back to Sample Detail

Sample Record for 2025-10-06-60

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001059 DEA: 112N2334 EFIS: 1124000191 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-5,15-Var
Work Description: MICROSURFACING, COLD PLANE, HMA TYPE A, SIGN INSTALLATION & STRIPING.
Location Description: SAN DIEGO COUNTY AT VARIOUS LOCATIONS
Contractor Name: PAVEMENT COATINGS CO.
Contractor Address: Unknown
Resident Engineer: Fahad Masud Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-10-06-60
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Asphaltic Emulsion
Sample Taken Date: 10/06/2025
Date that the sample was received by the laboratory/organization performing the testing: 10/13/2025
The quantity of what the sample constitutes: 2qt, one container
A brief description of the sample: Emulsion- MSE
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Substanable Emuision

Material Information

Emulsion Grade: MSE
Lot Number:
Sub Lot:
Dilution Percentage Rate: N/A
Test results on following page(s): 8

Test Results

Test 1 of 8

DIME Test ID: 2025-10-06-60-1
Test Method: AASHTO T59-18: Standard Method of Test for Emulsified Asphalts (Sieve Test (Sec. 13))
Verified Date: 10/18/2025
Date Tested: 10/16/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test: Received sample weight less than 1,000 g/ no test result
Test Result Compliance:
Additional Comments When Verified:
Sample retained no data0 %

Test 2 of 8

DIME Test ID: 2025-10-06-60-2
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Particle Charge Cationic Emulsified (Sec. 8))
Verified Date: 10/18/2025
Date Tested: 10/16/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Level of current used 8.0 mA
Electrode Type Positive

Test 3 of 8

DIME Test ID: 2025-10-06-60-3
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Viscosity (Saybolt Furol) (Sec. 9))
Verified Date: 10/18/2025
Date Tested: 10/16/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Efflux time (ET) for test sample 33.4 sec
Corrected efflux time as the Saybolt Furol viscosity (Corrected V) 1 sec
Test efflux temperature 77 F

Test 4 of 8

DIME Test ID: 2025-10-06-60-4
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Verified Date: 10/18/2025
Date Tested: 10/16/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
How many beakers will be used to conduct the test? 4
Beaker 1 Residue 64.6 %
Beaker 2 Residue 64.2 %
Beaker 3 Residue 64.6 %
Beaker 4 Residue 64.6 %
Percentage of residue 64.5 %

Test 5 of 8

DIME Test ID: 2025-10-06-60-5
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Storage Stability of Emulsified (Sec. 18))
Verified Date: 10/18/2025
Date Tested: 10/16/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test: No test result available due to sample weight being less than 1,000 g.
Test Result Compliance:
Additional Comments When Verified:
Percent residue from the bottom portion of the sample no data0 %
Percent residue from the top portion of the sample no data0 %
Storage stability no data0 %

Test 6 of 8

DIME Test ID: 2025-10-06-60-6
Test Method: AASHTO T301-22: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
Verified Date: 10/18/2025
Date Tested: 10/17/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
% Elongation Recovery 78 %

Test 7 of 8

DIME Test ID: 2025-10-06-60-7
Test Method: AASHTO T49-22: Standard Method of Test for Penetration of Bituminous Materials
Verified Date: 10/18/2025
Date Tested: 10/17/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Average Penetration 39 dmm

Test 8 of 8

DIME Test ID: 2025-10-06-60-8
Test Method: AASHTO T53-18: Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Verified Date: 10/18/2025
Date Tested: 10/17/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Thermometer used? 15C
Correction Needed? No
Bath Liquid Distilled Water
Mean Temperature 74.3 °C