Print Report | Back to Sample Detail

Sample Record for 2025-10-06-58

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000958 DEA: 021K0704 EFIS: 0224000048 QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-139-11.0/16.0
Work Description: PERFORM PARTIAL DEPTH RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A).
Location Description: LASSEN COUNTY ABOUT 9 MILES NORTH OF SUSANVILLE FROM 1.2 MILES SOUTH OF HAGATA ROAD TO 0.9 MILE SOUTH OF MEADOW CHANNEL BRIDGE
Contractor Name: S.T. RHOADES CONSTRUCTION, INC.
Contractor Address: P.O. Box 494520, Redding, CA 96049
Resident Engineer: Daniel Gibs Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-10-06-58
TL Number from the TL Form: 876960
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Production Start-Up
Type of Material: Aggregate
Sample Taken Date: 10/06/2025
Date that the sample was received by the laboratory/organization performing the testing: 10/06/2025
The quantity of what the sample constitutes: Production Start Up Evaluation
A brief description of the sample: 2 bags of Combined Lime Treated 1/2-inch Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D80074A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek Construction and Materials – Shaw Pit Facility (Lookout, CA)

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-25-0008
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Stream
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2025-10-06-58-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 10/16/2025
Date Tested: 10/16/2025
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
What type of gradation is being tested? Combined Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 98 %
Cumulative percent passing the 3/8 in. sieve 87 %
Cumulative percent passing the #4 sieve 64 %
Cumulative percent passing the #8 sieve 40 %
Cumulative percent passing the #16 sieve 26 %
Cumulative percent passing the #30 sieve 18 %
Cumulative percent passing the #50 sieve 13 %
Cumulative percent passing the #100 sieve 9 %
Cumulative percent passing the #200 sieve 6.8 %